Sakey Posted April 18, 2010 Share Posted April 18, 2010 I'm looking at replacing the gold centre Toyota Badges front and back with chrome ones! Does anyone have any for sale or willing to swap for gold ones? I'm not looking to replace it with a likwidart sticker. Thanks Link to comment Share on other sites More sharing options...
mr lover Posted April 18, 2010 Share Posted April 18, 2010 http://www.goldgenie.com/toyota-supra-silver-p-163.html I had these superb quality but not cheap Link to comment Share on other sites More sharing options...
Sakey Posted April 18, 2010 Author Share Posted April 18, 2010 http://www.goldgenie.com/toyota-supra-silver-p-163.html I had these superb quality but not cheap Cheers lover Did have a look at these but I can't to justify spending 110 of my english pounds on 3 badges That and i now want a gold plated DS! Link to comment Share on other sites More sharing options...
Stevo Posted April 19, 2010 Share Posted April 19, 2010 I've just replaced my Likwidart ones with some OEM Toyota badges. Got some very good condition badges from a breakers yard off a MR2 for £2, cleaned em up, applied some strong double-sided, weatherproof tape - job done! Just make sure you get the right sized ones, as Toyota seem to have gone 'oversized' on some of their models these days. Link to comment Share on other sites More sharing options...
Sakey Posted April 19, 2010 Author Share Posted April 19, 2010 Got some very good condition badges from a breakers yard off a MR2 for £2, cleaned em up, applied some strong double-sided, weatherproof tape - job done! Didn't think of doing that! Have you got any pictures of the MR2 ones fitted? Did you have problems with the curve of the bonnet and boot making them not lay flat? Link to comment Share on other sites More sharing options...
Stevo Posted April 19, 2010 Share Posted April 19, 2010 Have only done the front one so far as I'm in 2 minds about the rear - fitted no problems though. The tape I used was actually in a sheet format rather than a roll, this means I was able to stick the badge down on one side of it then just cut round the outside and the inner areas using a v. sharp craft knife - peel the backing off and stick to a clean bumper. Will get you a pic when I get home tonight mate. Link to comment Share on other sites More sharing options...
Swampy442 Posted April 19, 2010 Share Posted April 19, 2010 Ive got a brand new, still in the bag big T badge at home, althought not sure if its Supra sized... Link to comment Share on other sites More sharing options...
Sakey Posted April 19, 2010 Author Share Posted April 19, 2010 Will get you a pic when I get home tonight mate. Cheers Stevo! Ive got a brand new, still in the bag big T badge at home, althought not sure if its Supra sized... Swampy, could you check if its a simlar size to the supra one or have you any idea what car it was for? Link to comment Share on other sites More sharing options...
Swampy442 Posted April 19, 2010 Share Posted April 19, 2010 It was for a Soarer boot, Ive no idea if its Supra sized.. Link to comment Share on other sites More sharing options...
Stevo Posted April 23, 2010 Share Posted April 23, 2010 Sorry these have been so long in coming mate Link to comment Share on other sites More sharing options...
Sakey Posted May 23, 2010 Author Share Posted May 23, 2010 Cheers mate for the pictures! Totally forgot about this thread! Think I'm going to try and source MR2 badges like you. They seem to do the job nicely. Link to comment Share on other sites More sharing options...
Recommended Posts