stevie_b Posted May 9, 2005 Share Posted May 9, 2005 A simple question to answer (hopefully!): Which warning lights on the left-hand side of the dash should show when the ignition key is at the 1st (normal running) position (whilst the engine is off, of course)? Thanks in advance! Link to comment Share on other sites More sharing options...
Ian C Posted May 9, 2005 Share Posted May 9, 2005 All of them. It's a diagnostic check for the bulbs. If they don't light up, the bulb has gone - one way or another -Ian Link to comment Share on other sites More sharing options...
stevie_b Posted May 9, 2005 Author Share Posted May 9, 2005 Thanks Ian, I was afraid you'd say that! *rolls up sleeves, reaches for screwdriver* Link to comment Share on other sites More sharing options...
Barry Posted May 9, 2005 Share Posted May 9, 2005 All of them. It's a diagnostic check for the bulbs. If they don't light up, the bulb has gone - one way or another -Ian So where's the diagnostic light to tell you if the bulb has gone!? : Link to comment Share on other sites More sharing options...
Ian C Posted May 9, 2005 Share Posted May 9, 2005 It's the one labelled in black writing on a black background that lights up black. -Ian Link to comment Share on other sites More sharing options...
Barry Posted May 9, 2005 Share Posted May 9, 2005 It's the one labelled in black writing on a black background that lights up black. -Ian Aw bugger! Mine must have blown cause I cant seem to find it! Link to comment Share on other sites More sharing options...
imi Posted May 9, 2005 Share Posted May 9, 2005 whats the light on the left that lights up with REAR LIGHTS ON? This bulb is not present in my car, mind you one of the rear lights has been converted to a rear fog light....could this be the reason why it has been disconnected. The seatbealt buld, is this standard on all supras - cause mine doesnt work either. Link to comment Share on other sites More sharing options...
Willson Posted May 9, 2005 Share Posted May 9, 2005 Also common for the solder joints to go on the back of the pcb. This happened on mine. Fixed by just reheating the solder on the bulbs holders. (actually are they not leds ?) Link to comment Share on other sites More sharing options...
stevie_b Posted May 10, 2005 Author Share Posted May 10, 2005 Also common for the solder joints to go on the back of the pcb. This happened on mine. Fixed by just reheating the solder on the bulbs holders. (actually are they not leds ?) I'll have a look sometime. The bulb setup that's currently in my supra is weird: I had an engine error, but couldn't initially read the code because ... there was a bulb in the ABS holder (my car doesn't have it), but not in the "orange engine icon" bit. Obviously a previous owner has tinkered and not put things back as they should be. I look forward to find out what's going on in the left-hand part of the warning dash! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now