Chris Wilson Posted August 22, 2008 Share Posted August 22, 2008 Stripping my 4-AGE Toyota engine for a rebuild and looking at some new pistons. Here is Mahle's idea of a proper race Formula Atlantic engine piston versus Wiseco. Good example of why I call most American pistons boat anchors If YOU were a con rod which one would like to be stopping going through the head at 11.000 RPM? To be fair there's a big price difference, but honestly, those Wiseco ones are HEAVY!!! Link to comment Share on other sites More sharing options...
supra Posted August 22, 2008 Share Posted August 22, 2008 the piston in the 1st picture has surface det right? Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 22, 2008 Author Share Posted August 22, 2008 Nope, just a bit of carbon on it. Been stood awhile by the looks of it, too. Link to comment Share on other sites More sharing options...
Thorin Posted August 22, 2008 Share Posted August 22, 2008 But the Wiseco one is shinier Chris, much more bling. Link to comment Share on other sites More sharing options...
b_have Posted August 22, 2008 Share Posted August 22, 2008 I would choose the Wiseco for longevity (skirt length) We use Wiseco ultralite forged, Ecoat antidet pistons in all our Kawasaki race engines (non-hypereutectic).Never had a problem. Are Mahle's pistons 4032 or 2618? Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 22, 2008 Author Share Posted August 22, 2008 No idea what material the Mahle ones are, but at the sort of piston speeds this thing uses I would go for lightweight. Mahle was the piston of choice in FA, Wiseco just make a suitably sized and pocketed replacemnt. It needs a full refresh every 5 hours or so run time, so piston life as such is not an issue as they get binned anyway, with valves, springs and caps and collets. The short service life, and the maintenance cost is making me think of dropping the CR, fitting mild cams and putting a turbo and I/C on it. I just don't seem to have the time any more for such frequent engine strips on something I am not getting paid to work on. Getting older and slower...Cheers. Link to comment Share on other sites More sharing options...
dandan Posted September 1, 2008 Share Posted September 1, 2008 It needs a full refresh every 5 hours or so run time, Sod that! Link to comment Share on other sites More sharing options...
Matt H Posted September 19, 2008 Share Posted September 19, 2008 So i thought; yeah the ones in the last picture look far superior than the ones in the first, but then you say the ones in the first picture are better. Looks arnt everything in the piston world then Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now