Reesen Posted January 8, 2008 Share Posted January 8, 2008 Don´´t know if this should have been in technical questons so move it if im wrong! I´ve been reading alot on this side, and other sides lately, to find out what whould be the best setup for my car, and I cant say I got any wiser... Weel, I did, but not sure enough in my self to order the last things for my singel conversion! So here are some things that im not sure about, hope you can answer Im aming for 600Bhp. 1: Witch Cams should I go for? Im jusing a GT4067 turbo (not one of the most used ones on singels) Im not boulding a dragcar, but still want a fast road car! IN264 EX264, Or IN264 EX272?? If I use the last setup, wouldent I then get a bit more rpm range?? 2: ECU/piggieback.. I wanna use Apexi FC, just need the FC (A friend has the commander.. So if you got a cheep FC, hear of you ) but is it good enough, and is it in position to handel my needs? Or do I need to get an HKS Fcon, or AEM box? 3: fuel system.. Wouldent it be best to bay a HKS or BL fuel rail? Or could I use the stock one, and just put in some bigger injectors, and a bigger fuel pressure regulator? and whar injectors to use.. That I dont know anything about, High or low ohm ect ect.. opgrade fuel lines? Hope you can help me with these things.. Link to comment Share on other sites More sharing options...
Nic Posted January 8, 2008 Share Posted January 8, 2008 Hi Christian Which Supra model do you have? Euro or J-spec, also is it 2JZGTE or 2JZGE engine? 1. I would go with in264/ex264 2. The Apexi PFC is very good, but they were discontinued last year and are hard to find, saying that I know someone with one for sale at the moment if interested. You should really choose the ECU based on who is going to do the mapping for you. 3. It is up to you, you can either fit a new rail/injectors or just fit injectors in the the stock rail. The type of injectors will depend on which Supra/engine you have. cheers Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 8, 2008 Share Posted January 8, 2008 You cannot, CANNOT map a Power FC properly with the hand held Commander, you need to get Datalogit software from one of its vendors. I can get it for you if you can't find a seller over there. The Datalogit software enables you to use a laptop, see where in the map you are, plus unlocks lots of things unavailable to the Commander. If it were my engine I'd try 272 inlet and 264 exhaust, but 264 / 264 will be safe and fine with that turbo. Link to comment Share on other sites More sharing options...
Ian C Posted January 8, 2008 Share Posted January 8, 2008 If it were my engine I'd try 272 inlet and 264 exhaust, but 264 / 264 will be safe and fine with that turbo. That opens an old debate back up Dammit we asked for your input back then when testing them Now is a bit late but since I haven't sold the bastard 272 intake camshaft I bought, can you shed any light on the inverse stagger setup that we may have missed...? Link to comment Share on other sites More sharing options...
tooquicktostop Posted January 8, 2008 Share Posted January 8, 2008 I read the 272 cam thing with interest too, I have ditched the 264 ex, 254 in for 272 ex and in on the new build and will be interested how this changes the power delivery and curve when mapped Link to comment Share on other sites More sharing options...
Reesen Posted January 8, 2008 Author Share Posted January 8, 2008 Nic Hi Christian Which Supra model do you have? Euro or J-spec, also is it 2JZGTE or 2JZGE engine? 1. I would go with in264/ex264 2. The Apexi PFC is very good, but they were discontinued last year and are hard to find, saying that I know someone with one for sale at the moment if interested. You should really choose the ECU based on who is going to do the mapping for you. 3. It is up to you, you can either fit a new rail/injectors or just fit injectors in the the stock rail. The type of injectors will depend on which Supra/engine you have. cheers The engine is a us-spec 2jzgte.. sorry i dident make that cleare! What would be the diffenrece between IN264/EX264and IN264/EX272 be? How mutch for the apexi? Gues it would be Kiesa who would map it, think he´s the only one who can do it around here! What would my other choices of ecu/piggyback if im to cheap tp spend it on a hks aem So I could just go with some bigger injectors, no fuel rail, fuel prs reg, or bigger fuel lines?? Chris Wilson You cannot, CANNOT map a Power FC properly with the hand held Commander, you need to get Datalogit software from one of its vendors. I can get it for you if you can't find a seller over there. The Datalogit software enables you to use a laptop, see where in the map you are, plus unlocks lots of things unavailable to the Commander. If it were my engine I'd try 272 inlet and 264 exhaust, but 264 / 264 will be safe and fine with that turbo. Has anyone tried the 264 272 setup with a simular turbo (should be simular to the BL67 right?)! Link to comment Share on other sites More sharing options...
tucky40 Posted January 8, 2008 Share Posted January 8, 2008 The american testing on supraforums showed that power wasnt as good on an inverse stagger set up. I thought that theory had been put to bed. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now