dani_r

Nice one chaps, thanks for your input! I think i'll try the adaptor and if I have problems I'll work from there.

5w seems to be the one then, being on the IoM nothing is far away from anything!

If everyone who has CDs/LPs/DVDs they want rid of gets a list together i'm sure you could shift some on here! I'd be interested in a look

No problems getting the filter in and out?

How come it was reading high?

Time once again for an oil change! I got in contact with OilMan and he recommended the following: Motul 8100 Xcess or the Fuchs Titan Supersyn 5w-40 http://www.opieoils.co.uk/c-656-5w-40.aspx I have a 93 JSpec NA with 105,000km. Has anyone had any experience with these oils as they're new to me and wanted peoples thoughts. I also thought about trying the Silkolene PRO S 5w-40 Ester Synthetic. Any input would be appreciated:) Cheers Dan

Not sure, he might be on holiday like some people still are! Loads of people go back to work tomorrow so I'd hang on until then and try again:)

What do you mean by correct resistance?

Sorry, I see what you mean! I meant Sandwish plate adaptor in between block and filter to fit Oil Pressure & Temp sensors. I've re-done my original post to what it 'should' say

Good stuff! No relocation kits for me

I've been doing a bit of research & looked back at previous threads on this fine forum:D for details relating to the oil filter and if it will be tight/impossible to get back in once the sandwich plate adaptor goes on. It's a pain in the ass as it is, but with a sandwich plate adaptor in there am I asking for trouble? I'm buying some gauges for Oil Pressure & Temp plus the sandwich plate adaptor from this website: http://www.deftracing.com/prosport_gauges/oil_gauge_install_adaptor_plate.htm I don't particularly want to mess around with relocation kits plus I have ramp access so no problems there. Any thoughts? Cheers:thumbs:

Try Keron, he has loads of stuff in. That'd be your best shot.

Any news on these?

I like the CF overlay stuff Nic, is there a price on that?

Do you have any pics of the Do-Luck front wings?

There's this tasty little number! Posted by *Shane* on another thread, but I thought it might be of interest.....if you've got 3k to blow that is.... http://cgi.ebay.com/ebaymotors/JDM-9...1%7C240%3A1318

Is it a stick on type or a complete replacement?

That seems MUCH easier! Has anyone any experience with the seller? Is it a good product?

So how do people do it? I thought that they just used sheets of CF then resin on top, perhaps not that simple but isn't that the basic idea?

I'm thinking about playing around with some carbon fibre sheets, looking mainly at the dash panels. Has anyone ever had a play around with carbon fibre? This is the website I've found for the sheets: http://www.carbonmods.co.uk/Products/Wet-Lay-Carbon-Fibre-Sheet__CMFCS1MM.aspx I'm trying to source a donor set of pre-facelift dash panels to try it out on, so if anyone would like to donate a set of knackered ones or has some to sell i'd be interested. D

That looks sweeeeeeetttt!!

£20 each?

How much for Star Wars & Mirrors Edge?

No, but you can pick it up in the HMV Sale for £25. Is that what you're after?

Agreed! When the threads get moved doesn't it delete the posts or something?