markybhoy86
-
Posts
235 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by markybhoy86
-
hda a look at the glowshift webiste as i seen one for sale in the forsale section and wanted to check what they were like. they look not bad in the pictures but has any got 1 or dealt with them? just want to know the quality of the gauge.. heres the link if use want a look http://www.glowshiftdirect.com/tinted-7-color-gauges.aspx i know these are a US only site but u can get them on ebay for the same price
-
i removed the 2" RR today and had a 1.6" one made up ( 1.6" was the smallest punch they had) it brought the boost back down to normal so i turned it up with the boost controller to 1bar, seems to be alright so far. its going into a tunning place to get everything checked over AFR's etc. at least thats me got one thing on the mend so far lol struggling with upper control arms-been on one side for 2 hours, gave up lol il try again 2moro when my back recovers lol
-
issues arnt solved yet, maybe get some of them done at the weekend. does one of u drive a silver supra n/a? seen it up the town a couple of times
-
i brought it up again asking if i had to remove the driveshaft rather than making a new post and getting told to use the search button cheers
-
excellent i had checked the manual as wel and it says remove.didnt think i had to.cheers id b lost without this forum lol
-
aye thats wot a was gona try first,rr at 1.6" and c if i can get the boost down and take it from ther.doin that 2moro so il let use know wot happens.cheers for the advice
-
wot does the fuel pump have to do with me overboosting? it can nw creep to 1.3 and thats me with al controler settings at min
-
i'm about to tackle the same job to remove the upper arms, do you need to remove the driveshafts? or is there a way to work around not removing them? M
-
not really heard of it, when is it? im moving to australia in june so ifs its after then i doubt it lol, trying to get my car running right just now, having a bit of trouble with the boost so i'll see what state its in before doing a lot of running around
-
a never get spotted in glasgow lol even after getting the noisiest exhaust ever fitted av still not been spotted lol
-
hks FCD boost controller boost gauge fuel decat 2" restrictor after 1st decat i dont know about a boost cut controller ? whats that? no i havn't reset the ecu, i'll try that 2moro though
-
the connectors or the coil packs themselves? both have been checked recently cause of another problem i had and they where fine
-
dont know the make of the boost gauge off the top of my head, i'll check when i get in the motor after work, can c 1.2 in 2nd gear, after i seen it i didnt take it above in any other gear....when it hits 1.2 the engine makes a weird sound as if its struggling and the red warning light comes on on the boost gauge and it wont pull anymore, if i ease off the 1.2 till the light goes off it will pull quite happily. i thought 1.2 was excessive for a j-spec?
-
yeah thats what i thought the RR i bought was?! do i get one thats 1 3/4" made up and try that then turn the boost up?
-
Got my jspec supra decat last week but the guys had fitted the restrictor ring at the wrong place ( near where the 2nd cat was), the boost was running about 1.4 so i never drove it heavy and got it moved to where it should have been today- its still overboosting at 1.1-1.2 its a boost logic exhaust 3" to 4" at 2nd decat the restrictor ring is one i got off Paul (2") how can i get the boost down?? do i get a smaller restrictor ring (1 3/4")? i've got a boost controller etc but i know you can only turn boost up not down, so thats not much use right now lol
-
that link doesn't work. 75 seems good since for toyota to supply an arm its 700 for both lol i'll pm you
-
tryed to drop him a PM but his inbox is full is there any sites where i can order either a full set of poly bushes or just the ones i need. i don't mind them coming from overseas. does Nic supply anything like this?
-
mk4 supra 1993 tt needing inner rear upperwishbone bushes, looking for 2 polly for just now but ideally im looking for a whole set, anyone know where to get them. thanks M
-
cheers mate i'll pm them just now M
-
i didnt know, could i have a name please of one or whoever you have used?
-
who does them? r u meaning the whole 1st decat?
-
aye a think its that one, is that where the gasket goes? could you take a picture of both ends please and label the pictures so i know which side is which lol thanks a lot mate will give him a rough idea but il need to try and get somthing more lifelike, are any of the downpipes on EBAY any good? if they are could someone post the link up please, could save me some cash am just not sure what one suits thanks M
-
let me reword that,i meed a picture of the flange were the turbo and downpipe meet or a gasket so that i can get the flange made up before the car goes in. mistyped it before m
-
needed before the 6th may, can get one made up but if i can pick one up cheaper second hand then that would be better cheers Mark
-
Anyone have a picture of the flange at the end of the turbo downpipe, j-spec getting my supra bpu and rather than leaving the guy with the car for a day or so i'd rather get him a picture of the flange where the gasket goes, anyone have anything or where i could get a gasket to give him? cheers M
