ChrisSZ
-
Posts
2346 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by ChrisSZ
-
I got too much baby stuff on my hands:Pling: Not actually my find - pulled it off the GT4OC forum:d Zap, can I borrow your suspension top mount nuts to send to colsoop as we discussed? I can (hopefully) collect them off you on Monday
-
Within reaon, no! Poor grammar and spelling do not (in moderation) affect this forum. However, I do feel that people should be encouraged to try and write correctly (bearing in mind that there is some debate as to what is 'correct' these days:))
-
OK mate - no worries. Worth a try though:)
-
Any chance of tagging onto the bottom of the list?? Only saw this today and these would go a treat with my Metal Monkey dials (pretty please?)
-
http://www.chavelocity.com/index.htm :d
-
Both fine cheers dude - I'll bring some pics on Monday if I'm allowed out :)
-
Typical Para - all that falling out of planes knackers the brain cells :)
-
Errr??? Wasn't that WWI ??? Train carriage, Armistice Day, France, all that lot??? ( http://www.spartacus.schoolnet.co.uk/FWWarmistice.htm )
-
I'm sure someone else used the caps from the cheap stainless steel thermos flasks Tescos/Sainsburys sell :) Looked very effective
-
I would say that it depends on what kit it is, who it's made by etc.
-
I fitted HIDs to the fogs as well :)
-
Yes they fit - need spacers to look 'propper' though and you need to play with the centre caps (lose the Mazda logo) and get some hubcentric rins as the centre bore is bigger than on a Supe. They are 18" X 8"
-
There's a link at the bottom of the pics mate :d
-
Pics - this is the bad curbing (the rest are pretty much untouched) The tyres (all 4)
-
So far she runs absoluely fine - no sign of stalling or anything like that. Some extra induction noise and the filter's still stone cold even after a reasonable drive around :)
-
76mm from the throttle body. However, the end of the Apexi tube is more like 80mm. I cut some of it off (aboit 1 1/2") and used a piece of 80mm samco with the rubber from the throttle body stuffed inside it at one end to make a snug fit betwen the ally pipe and the Apexi :)
-
From what I can work out they have a 'variable baffle' type of thing fitted. At low speed/revs it's closed to keep the noise down and as the revs rise it opens to allow more gasses/noise out. Not really fake.
-
LOL. Yes, I did that in my old GT4 at college when I first got it :) I was showing a mate the car, shut the door (with the engine running) and got locke out!! Had to get the mother-in-law to go to our house (she has a spare key) find my spare keys and then drive down to me. The car was running for around 2hrs ---- but at least it was in a car-park and not blocking a bloody road LOL :) PS I have the same alarm system in the Supe now so I always leave a window or the boot lid open just in case
-
Lol
-
In that case you'd be better off starting with a TT - unless you intend to run BIG BHP then the Greddy intake is not worth the expense. If you are planning big power figures then if you start off with an NA you can expect huge builds when you rebuild the engine to support big boost. A full decat and decent system on an NA is supposed to be worth around 5 - 20bhp as I recal, depending on the car and system used. Use the FAQ section and the search button - they are your freinds :) and both topics have been covered fairly extensively in the past:)
-
RS-R is a make of exhaust - mild steel tubing with a stainless steel back-box. Sounds the mutts nutts, especialy once the two catalytic converters have been removed and replaced with straight-through pipework (i.e. a decat) Dump valves are to be found on turbo motors only. If you fit a real one somewhere on an NA it will do feck-all. If you fit an electronic 'simulator' you will probably be drummed out of the club and shunned by supra owners world-wide:)
-
PCV pipe vented to atmosphere Apexi filter with vacuum pipe plumbed into it (note panel under filter missing:) ) The whole shebang Looking for the next little bling project now LOL The pipes came from these guys http://stores.ebay.co.uk/REGALS-MOTORSPORT
-
Wife's in bed right now - knackered:Pling: Little lady's lying on my shoulder dribbling warm, partly digested milk down my neck whilst trying to get me to heave by making funny noises and smells from her other end:Pling: :Pling: AND I LOVE IT:d :d
-
I can post a couple of pics up with more info tomorrow if you like?
-
