Silece2k6 Posted April 18, 2011 Share Posted April 18, 2011 hey guys, suddenly my indicators won't work. wenn I use the switch, nothink happens. no click,click,click or green arrows are going on... Maybe a fuse is damaged? but where is the Indicator Fuse? Does anyone has a Fusebox wiring diagram or something? and I need the color of wires from the Ignition: so Ignition, Acc and constant + Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted April 18, 2011 Share Posted April 18, 2011 the fuse boxs are - one under the bonnet, one in the drivers foot well, on the right, its a PITA to get to! Quote Link to comment Share on other sites More sharing options...
Nic Posted April 19, 2011 Share Posted April 19, 2011 As said, check the fuse, see attached.FUSES_AND_CIRCUIT_BREAKERS.PDF Quote Link to comment Share on other sites More sharing options...
heckler Posted April 19, 2011 Share Posted April 19, 2011 hey guys, suddenly my indicators won't work. wenn I use the switch, nothink happens. no click,click,click or green arrows are going on... Maybe a fuse is damaged? but where is the Indicator Fuse? Does anyone has a Fusebox wiring diagram or something? and I need the color of wires from the Ignition: so Ignition, Acc and constant + Is that both indicators? As they both go through the hazard warning switch, if that's unplugged, the indicators don't work Quote Link to comment Share on other sites More sharing options...
Silece2k6 Posted April 20, 2011 Author Share Posted April 20, 2011 What you mean "hazard warning Switch"? The Fuses are all ok -.-. I remember, when I turn the Switch, 'Nothing' Happens no click, click or Indikator arrows are going. Complete Dead! Quote Link to comment Share on other sites More sharing options...
heckler Posted April 20, 2011 Share Posted April 20, 2011 the switch on the top of the dash, 4-way flasher? sets all the indicators off at once... Quote Link to comment Share on other sites More sharing options...
Silece2k6 Posted April 20, 2011 Author Share Posted April 20, 2011 Okaaaaay?? Sry I don't Know what Switch you mean Quote Link to comment Share on other sites More sharing options...
heckler Posted April 20, 2011 Share Posted April 20, 2011 Its a switch with a red triangle on it, sat next to the ODO/warning lights... Quote Link to comment Share on other sites More sharing options...
Silece2k6 Posted April 20, 2011 Author Share Posted April 20, 2011 oh man the connector on the back of the Hazard Warning was not connected... Kick Ass by myself thank you. but what are the 3 wires of the Ignition? Need it for my Turbotimer. Quote Link to comment Share on other sites More sharing options...
spikedjack Posted December 9, 2013 Share Posted December 9, 2013 I'll bump this in case anyone else has this problem. I had the issue today where neither my hazards nor my indicators would work. Turns out there was a blown 15 amp fuse in the engine bay (hazards) which when replace made my hazards work but not the indicators, and also a blown 7.5 amp fuse in the drivers footwell which when replace made the hazards work. Might be of use for someone in the same situation as me Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.