Guest Jason-B Posted August 24, 2007 Share Posted August 24, 2007 After changing my suspension last week, the Left rear ARB drop link nut seized halfway and had to be cut off, short of getting a new one from my local toyota dealer does anyone know the size & pitch of the thread on the drop link as i cant seemt i find a nut to fit it?? Many thanks Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 24, 2007 Share Posted August 24, 2007 M10 x 1.25mm pitch. They are, like many threads on Jap cars, metric fine, you need a good engineering supplies place to find someone with stock. Link to comment Share on other sites More sharing options...
Guest Jason-B Posted August 24, 2007 Share Posted August 24, 2007 Thanks Chris, are these readily available from autofactors? Link to comment Share on other sites More sharing options...
carl0s Posted August 24, 2007 Share Posted August 24, 2007 I had major trouble finding metric fine nuts anywhere. I popped into my local Toyota dealer as a last ditch effort, and he came out with a load in his hand within 30 seconds! Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 24, 2007 Share Posted August 24, 2007 Probably not, Toyota will have loads though. If you are really stick I have some. Link to comment Share on other sites More sharing options...
SimonB Posted August 25, 2007 Share Posted August 25, 2007 When it's just a nut which is going to be very cheap it's easier just getting it from Toyota. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now