tomssupra Posted April 26, 2007 Share Posted April 26, 2007 Hi, Recently had a Trial rear fitted by knight racer, since then, the passenger side rear keeps rattling over EVERY bump, and its really annoying. I know its the side of the bumper, under the car bit, because I can rattle it with my hand - does anyone know how to tighten this up? thanks, Tom Link to comment Share on other sites More sharing options...
RobSheffield Posted April 26, 2007 Share Posted April 26, 2007 It REALLY needs brackets fitting to it unless they already are. Was it modded to clear an angled exit exhaust?? Link to comment Share on other sites More sharing options...
tomssupra Posted April 26, 2007 Author Share Posted April 26, 2007 the exhaust is RSR magic, which is angled, im going drager soon which i understand is straigh? is this the problem? Link to comment Share on other sites More sharing options...
RobSheffield Posted April 26, 2007 Share Posted April 26, 2007 If it has been cut away it can cause weaknesses, although iv never seen one cut. The brackets are a must though, especially for high leptonage. Link to comment Share on other sites More sharing options...
AlanM Posted April 26, 2007 Share Posted April 26, 2007 There is someone on here makes/supplies the brackets, trying to remember who it is Link to comment Share on other sites More sharing options...
uzthedentist Posted April 26, 2007 Share Posted April 26, 2007 mine has no such rattle i have a hks silent hi power Link to comment Share on other sites More sharing options...
Kopite Posted April 26, 2007 Share Posted April 26, 2007 Psymon but he sold his car i think, Supradibbs knows about the brackets too Link to comment Share on other sites More sharing options...
Dragonball Posted April 27, 2007 Share Posted April 27, 2007 Hi mate - as you thought this is probably the exhaust rattling against the bodykit IMHO - but it MUST be properly bracketed on! You can ensure this happens with some ali bracketing - there should be bolt holes where this can be fixed to the car frame etc If I may suggest - get it up on a ramp and bung a few spacer washers on the exhaustfixing bracket Mine is a straight through Gredddy and it still needed some on there - about 10mm Link to comment Share on other sites More sharing options...
tomssupra Posted April 27, 2007 Author Share Posted April 27, 2007 Thanks Paul, Thanks guys, It doesnt look like its knocking against the exhaust, it makes the same noise when you shut the passenger door, so when I hold the spat (that area) it doesnt make the rattle - Link to comment Share on other sites More sharing options...
michael Posted April 27, 2007 Share Posted April 27, 2007 Sounds like you need to go back to the bodyshop and ask them to sort it out. Link to comment Share on other sites More sharing options...
uk-rich Posted April 27, 2007 Share Posted April 27, 2007 Sounds like you need to go back to the bodyshop and ask them to sort it out. correct Link to comment Share on other sites More sharing options...
psymon Posted June 1, 2007 Share Posted June 1, 2007 Did I hear my name mentioned. I still have a few spare sets of brackets. If anyone needs them and can get more made. Si Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now