DamanC Posted March 16, 2007 Share Posted March 16, 2007 Well, this evening i was out fitting my TRD spoiler and having one of those spur of the moment thoughts. I know, ill tear the rear wiper off. So i did. Naterally i now have a hole temporally covered with red electrical tape which obviosly needs filling, my question is, what have you guys filled yours with? Link to comment Share on other sites More sharing options...
Graham S Posted March 16, 2007 Share Posted March 16, 2007 spray the rest of the car red to match the tape! Link to comment Share on other sites More sharing options...
flukey-lukey Posted March 16, 2007 Share Posted March 16, 2007 Body Filler? Link to comment Share on other sites More sharing options...
JamesG Posted March 16, 2007 Share Posted March 16, 2007 It's a convenient hole to fit a rear wiper Link to comment Share on other sites More sharing options...
DamanC Posted March 16, 2007 Author Share Posted March 16, 2007 *sigh* Grommits any one? Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted March 16, 2007 Share Posted March 16, 2007 You can get rubber bungs from any good motor spares mate Link to comment Share on other sites More sharing options...
flukey-lukey Posted March 16, 2007 Share Posted March 16, 2007 *sigh* Grommits any one? Gromits would stand out and look daft imo. Get a quote from a bodyshop to filler it and paint it, shouldn't imagine it'll be very expensive Link to comment Share on other sites More sharing options...
Graham S Posted March 16, 2007 Share Posted March 16, 2007 weld a plate on the inside of the boot and fill the rest.. Bodyshop me thinks? Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted March 16, 2007 Share Posted March 16, 2007 What ya doing with ya old wiper ??? Link to comment Share on other sites More sharing options...
DamanC Posted March 16, 2007 Author Share Posted March 16, 2007 Putting it back on at this rate Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted March 16, 2007 Share Posted March 16, 2007 Just mines showing some rust and paint bubbling so i'd like a new one ..... Link to comment Share on other sites More sharing options...
DamanC Posted March 16, 2007 Author Share Posted March 16, 2007 Ill let you know about it when i know what im gonna do buddy Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted March 16, 2007 Share Posted March 16, 2007 Cheers mate Link to comment Share on other sites More sharing options...
supRo Posted March 16, 2007 Share Posted March 16, 2007 Welded would be best - That's what was done to mines by the bodyshop - did the washer jet hole too. Ro Link to comment Share on other sites More sharing options...
DamanC Posted March 16, 2007 Author Share Posted March 16, 2007 Looks nice Ro, did they just weld sand and blend or repain the whole shabang? Cost much? Link to comment Share on other sites More sharing options...
supRo Posted March 16, 2007 Share Posted March 16, 2007 Looks nice Ro, did they just weld sand and blend or repain the whole shabang? Cost much? I had to have rust sorted around the glass so that's why I thought I'd get all the holes filled. It was completely re-sprayed. It was about £400 from GVN - They are expensive but usually do a very good job. Glass needed taking out and new seals. Link to comment Share on other sites More sharing options...
Guest blueangel Posted March 16, 2007 Share Posted March 16, 2007 Mine was done also while i had the car in the bodyshop Link to comment Share on other sites More sharing options...
M4RK RZ Posted March 17, 2007 Share Posted March 17, 2007 ohhhhh i like Link to comment Share on other sites More sharing options...
Homer Posted March 17, 2007 Share Posted March 17, 2007 If you want to do it on the cheap then just remove the wiper and stick one of those door stoppers over the motor arm. Jamiep's had one of those since he bought it. It's ugly, but still looks better than with the wiper in place. Link to comment Share on other sites More sharing options...
DamanC Posted March 17, 2007 Author Share Posted March 17, 2007 Cheers guys Its not that i want to do it on the cheap, its so that i can have something other than red tape as temp measure so i can decide fully if i want a wiper or not Link to comment Share on other sites More sharing options...
Andy Supra Posted March 17, 2007 Share Posted March 17, 2007 weld a plate on the inside of the boot and fill the rest.. Bodyshop me thinks? Knightracer removed mine and welded a plate when I had my boot resprayed What ya doing with ya old wiper ??? If you need one i've one sitting in the garage motor and everything Link to comment Share on other sites More sharing options...
Konrad Posted March 17, 2007 Share Posted March 17, 2007 Cheers guys Its not that i want to do it on the cheap, its so that i can have something other than red tape as temp measure so i can decide fully if i want a wiper or not When you will find rubber or plastic cover with size fitting to wiper hole, pm me please Who knows exact size of this hole? This is my temporary solution on spoiler holes. Not polished yet as just painted all marks after spoiler... Bought those at Halfords, 1 pound for pack of 20 i think Link to comment Share on other sites More sharing options...
DamanC Posted March 17, 2007 Author Share Posted March 17, 2007 Who knows exact size of this hole? 34mm Link to comment Share on other sites More sharing options...
Konrad Posted March 17, 2007 Share Posted March 17, 2007 34mm Thanks, will do hunting tommorow, because I want to get rid of mine too I will eventually be filled professionally, but now there is no point as car will go for bodyworks and respray anyway next year. I belive that till this time I will become fully proffesional body repairer and painter lol Link to comment Share on other sites More sharing options...
MONKEYmark Posted March 17, 2007 Share Posted March 17, 2007 Well, this evening i was out fitting my TRD spoiler and having one of those spur of the moment thoughts. I know, ill tear the rear wiper off. So i did. Naterally i now have a hole temporally covered with red electrical tape which obviosly needs filling, my question is, what have you guys filled yours with? i bought a pack of 10 grommets from maplins for mine a bit of play in it but put a bit of mastic in and its fine. be better welded and filled.a grommet is a ok fix the grommets were about £2.50 for 10 they have a couple of sizes its the smaller of the 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now