Darrell Payne Posted July 16, 2004 Share Posted July 16, 2004 Finally got round to finishing this project on my 94' UK spec auto... Stock manifold has been modified to accept a 38mm Tial wastegate ,which vents to atmo ). These are stock based hybrids with the following work.. No.1 turbo the wastegate has been plugged and machining work done to housing... No.2 turbo the exhaust bypass valve has been removed and again machining done to the turbo housing.. These are running in TTC mode....so all vsv's and associated pipework has been removed... Have now had a boost controller fitted and upped the boost to 1.2bar ,plus had a MAP ECU fitted to remove the stock MAF .. Had the car on the dyno ( Thor racing ) Results of the latest dyno.....407bhp and 397ft/Lb at 1.24 bar Holds boost rock steady and its worth it just for the extremely loud wastegate ) There are some pics and dyno sheet at http://www.dazzspeed.co.uk under turboproject.. Dazz Link to comment Share on other sites More sharing options...
Dragonball Posted July 16, 2004 Share Posted July 16, 2004 Nice result at only 1.2 m8 Torque figure is really good Congrats on breaking new ground! Link to comment Share on other sites More sharing options...
Bobbeh Posted July 16, 2004 Share Posted July 16, 2004 Thats a lovely smooth power curve - nice Daz! Link to comment Share on other sites More sharing options...
LeeT Posted July 16, 2004 Share Posted July 16, 2004 nice result. ive just read about someone on supraforums doing this. how are you finding the MAP ECU as this is what i want to control my single upgrade when i eventually get round to it Link to comment Share on other sites More sharing options...
Gaz Walker Posted July 16, 2004 Share Posted July 16, 2004 Very well done Dazz, great figures Gaz. Link to comment Share on other sites More sharing options...
Darrell Payne Posted July 16, 2004 Author Share Posted July 16, 2004 cheers for the comments.. MAP ECU worked out fine ,have had no probs runs the same as stock.. Thor managed to take some of the over fuelling out at the top end and tweak the rest of the fuel map... Dazz Link to comment Share on other sites More sharing options...
MONKEYmark Posted July 16, 2004 Share Posted July 16, 2004 sounds like a cool project you have done. Link to comment Share on other sites More sharing options...
Bobbeh Posted July 16, 2004 Share Posted July 16, 2004 One question for your Darrell, whyis all your piping, PINK!? Link to comment Share on other sites More sharing options...
Darrell Payne Posted July 17, 2004 Author Share Posted July 17, 2004 rest assured the hosing is red,don't know what's going on with the pics to bring it up pink Dazz Link to comment Share on other sites More sharing options...
Bobbeh Posted July 17, 2004 Share Posted July 17, 2004 Hehe, ahh another case of the pink syndrome, like Matts old car Link to comment Share on other sites More sharing options...
baldy Posted July 18, 2004 Share Posted July 18, 2004 so people could this be done while still running in seq mode??? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now