Konrad Posted January 1, 2007 Share Posted January 1, 2007 I found this method to reset airbag light here on forum, connected cables to AB and TC and started to touch negative battery simulatounesly (spelling?). Airbag light is going off for like 1 second and then getting back to dissapear again when i touch battery with one of those cables. When should i actually stop touching battery? I'm doing it on ignition ON but engine is switched off. It looks like when i'm touching TC cable to battery, airbag is going off to get back when I'm touching AB cable. Any ideas or reccomendations? Link to comment Share on other sites More sharing options...
JustGav Posted January 1, 2007 Share Posted January 1, 2007 There is a procedure for doing it... http://www.mkiv.com/techarticles/airbag_light/airbag.htm Have fun dude.. Link to comment Share on other sites More sharing options...
Konrad Posted January 1, 2007 Author Share Posted January 1, 2007 Ye i've seen this article - so I have to alternate the two wires to the negative terminal of the battery untill light will go off for good despite me continuing this procedure? Is and airbag light going off when ignition is in ON position in properly set up car? Link to comment Share on other sites More sharing options...
TrickTT Posted January 1, 2007 Share Posted January 1, 2007 Follow the link posted, but dont be suprised if you dont get it 1st time. I've taken anything up to 1/2 hr to get it just right. Be patient Link to comment Share on other sites More sharing options...
Sharpie Posted January 1, 2007 Share Posted January 1, 2007 Follow the link posted, but dont be suprised if you dont get it 1st time. I've taken anything up to 1/2 hr to get it just right. Be patient yeah, same here Link to comment Share on other sites More sharing options...
Konrad Posted January 1, 2007 Author Share Posted January 1, 2007 Yes, but WHEN should I stop? When light will go off despite me still touching battery? Or is there any other signal, that I should stop? Link to comment Share on other sites More sharing options...
bignum Posted January 1, 2007 Share Posted January 1, 2007 Take the bulb out, thats what i did last time the dash was out, Link to comment Share on other sites More sharing options...
Mike M Posted January 1, 2007 Share Posted January 1, 2007 I did it for about 30secs and got it first time. Beginners luck I think. Link to comment Share on other sites More sharing options...
Pig Posted January 1, 2007 Share Posted January 1, 2007 Take the bulb out, thats what i did last time the dash was out, And if the light isnt flashing then it isnt broken I love fixing things that way! Link to comment Share on other sites More sharing options...
TrickTT Posted January 1, 2007 Share Posted January 1, 2007 Take the bulb out, thats what i did last time the dash was out, And then dont crash, cos your airbag wont go off:rolleyes: Link to comment Share on other sites More sharing options...
VIL Posted January 2, 2007 Share Posted January 2, 2007 Using the wires to put out the airbag light will work but its very difficult to do on your own. You really need someone looking at the light and someone doing the wires to get it right. I know what your asking, `how do you know when to stop`, cause the light will blink on and off when the wires are being touched. This is luck, timing and your mate going STOP at the right time! Basically they will see the light go out and stay out for a second longer than before and you need to stop immediately for it to take effect. Note, you need to keep trying! It does come down to a bit of luck, took me about 1/2 hour to get it right. Link to comment Share on other sites More sharing options...
bodilx6 Posted January 2, 2007 Share Posted January 2, 2007 a toyota garage can fix it with some electronic gadget.. If you're lucky they will do it for a sixpack... I fixed mine also by pure luck. I tried to follow the various guide without luck. So when I finally gave up in frustration tapped the battery without any timing at all, the indicator went off and stayed off... I have no idea of how to do it again. I'll just never turn the car on with the dash unplugged again... Link to comment Share on other sites More sharing options...
Lewis Posted January 2, 2007 Share Posted January 2, 2007 a toyota garage can fix it with some electronic gadget.. If you're lucky they will do it for a sixpack... I fixed mine also by pure luck. I tried to follow the various guide without luck. So when I finally gave up in frustration tapped the battery without any timing at all, the indicator went off and stayed off... I have no idea of how to do it again. I'll just never turn the car on with the dash unplugged again... You probably blew the bulb/fuse Link to comment Share on other sites More sharing options...
bodilx6 Posted January 2, 2007 Share Posted January 2, 2007 hee hee.. no, lights up nicely when the car starts up. Link to comment Share on other sites More sharing options...
bignum Posted January 2, 2007 Share Posted January 2, 2007 And then dont crash, cos your airbag wont go off:rolleyes: Goes out to garage to find a piece of wire and put bulb back in, Link to comment Share on other sites More sharing options...
Andy Supra Posted January 25, 2007 Share Posted January 25, 2007 Taking dash out today so will have to do this. Last time and first time I did it with the wires took like 30 secs on my own, beginners luck :S hope it's the same today Link to comment Share on other sites More sharing options...
Mike M Posted January 25, 2007 Share Posted January 25, 2007 Try and not turn the ignition on with the top dash panel disconnected and you won't need to reset it. Link to comment Share on other sites More sharing options...
Thomas.B Posted July 31, 2011 Share Posted July 31, 2011 Did this today and it worked like a charm, counted 1 sec inbetween, 8 times per side. Link to comment Share on other sites More sharing options...
Supralee Posted August 8, 2012 Share Posted August 8, 2012 Just used this trick with the wires, spot on and easy to do. Took about 5 mins, quickness was best, 8 repetitions on each side approx 1 sec apart worked.. nice one Link to comment Share on other sites More sharing options...
Batmax Posted August 8, 2012 Share Posted August 8, 2012 Is possible do that, who have another ECU like mine for ex. the AEM EMS ? Link to comment Share on other sites More sharing options...
Batmax Posted September 26, 2012 Share Posted September 26, 2012 no one ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now