Sharpie Posted March 6, 2004 Share Posted March 6, 2004 I'm posting these pic's up for CW but, might be useful for others to use as reference at a later date ? Link to comment Share on other sites More sharing options...
Sharpie Posted March 6, 2004 Author Share Posted March 6, 2004 . Link to comment Share on other sites More sharing options...
Sharpie Posted March 6, 2004 Author Share Posted March 6, 2004 .. Link to comment Share on other sites More sharing options...
Sharpie Posted March 6, 2004 Author Share Posted March 6, 2004 ,,, Link to comment Share on other sites More sharing options...
Sharpie Posted March 6, 2004 Author Share Posted March 6, 2004 Rears Link to comment Share on other sites More sharing options...
Sharpie Posted March 6, 2004 Author Share Posted March 6, 2004 xx Link to comment Share on other sites More sharing options...
Sharpie Posted March 6, 2004 Author Share Posted March 6, 2004 ... Link to comment Share on other sites More sharing options...
Sharpie Posted March 6, 2004 Author Share Posted March 6, 2004 ,, Link to comment Share on other sites More sharing options...
Sharpie Posted March 6, 2004 Author Share Posted March 6, 2004 Front back Link to comment Share on other sites More sharing options...
Sharpie Posted March 6, 2004 Author Share Posted March 6, 2004 Just to clarify Chris Link to comment Share on other sites More sharing options...
dude Posted March 6, 2004 Share Posted March 6, 2004 And your point is Pete ???? or was this a PM to CW that went wrong ??? Dude:flame Dev Link to comment Share on other sites More sharing options...
Bobbeh Posted March 7, 2004 Share Posted March 7, 2004 Originally posted by dude And your point is Pete ???? or was this a PM to CW that went wrong ??? Dude:flame Dev I was thinking the same! Link to comment Share on other sites More sharing options...
Matt Harwood Posted March 7, 2004 Share Posted March 7, 2004 Originally posted by dude And your point is Pete ???? or was this a PM to CW that went wrong ??? Originally posted by Peter Sharp I'm posting these pic's up for CW but, might be useful for others to use as reference at a later date ? I know my eyesights bad, but my memory is good enough to remember the first post! :p Link to comment Share on other sites More sharing options...
Sharpie Posted March 18, 2004 Author Share Posted March 18, 2004 Here are the above items back from CW's now all clean Link to comment Share on other sites More sharing options...
Sharpie Posted March 18, 2004 Author Share Posted March 18, 2004 Will get them painted and logo'd up this weekend. Link to comment Share on other sites More sharing options...
Sharpie Posted March 18, 2004 Author Share Posted March 18, 2004 last one. THANKS AGAIN CHRIS Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 19, 2004 Share Posted March 19, 2004 Originally posted by Peter Sharp last one. THANKS AGAIN CHRIS No problem Pete, but it REALLY buggered my tooth brush up doing `em... Link to comment Share on other sites More sharing options...
Sharpie Posted March 22, 2004 Author Share Posted March 22, 2004 So, what do you think ? Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 22, 2004 Share Posted March 22, 2004 Look good, but scrape the paint off the mating surfaces on the lugs where they bolt to the hubs. Link to comment Share on other sites More sharing options...
Sharpie Posted March 22, 2004 Author Share Posted March 22, 2004 Which bit Chris.... A or B area ? If it is A then I am alright as I have ordered new Bushs, the part highlighted. If it's B then arse! Whichever bit, is this so you have a nice smooth *flush* coupling when they are back on ? Link to comment Share on other sites More sharing options...
Sharpie Posted March 22, 2004 Author Share Posted March 22, 2004 and the pic Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 22, 2004 Share Posted March 22, 2004 "A" and the other side of the lug where the bolt sits, too. There should be a metal to metal contact really, aids heat flow, and the paint crushes so the thing may loosen after a while if not cleaned up. Link to comment Share on other sites More sharing options...
Sharpie Posted March 22, 2004 Author Share Posted March 22, 2004 Cheers - There will be a metal to metal contact for the nut & bolt to the caliper as there are some metal jackets that fit over the lugs, shown here which, I have ordered some new jackets too. So, it's just the jacket to lug on the back side that will be masked with the paint. (since the front side will have new Bushes) I guess your going to tell me to remove this painted section too on the back of the lug OR will this be OK ? Thanks Chris. Link to comment Share on other sites More sharing options...
ChrisR Posted March 22, 2004 Share Posted March 22, 2004 Originally posted by Peter Sharp So, what do you think ? Top job Peter, much easier when therye off. I did my four pots on the GT-Four before Christmas although still attached. Fiddley but well worth it. Are you putting stock rims back on your Supra or are you going for aftermarket. Link to comment Share on other sites More sharing options...
Sharpie Posted March 22, 2004 Author Share Posted March 22, 2004 stock for now. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now