Big Mark Posted February 21, 2023 Share Posted February 21, 2023 (edited) After building my project car for a number of years and just one 60 mile journey the decision was made to remove the entire DCT conversion and go in a different direction. Therefor pretty much an entire DCT conversion using an E9x gearbox is for sale. E9x to 2JZ DCT gearbox adaptor kit. Billet gearbox to engine adaptor plate to suit the BMW M3 E9x DCT gearbox. Billet Flywheel and flywheel adaptor to attach to the gearbox . E9x to Mk4 Supra rear mounting kit and flange. Billet propshaft adaptor to fit auto propshafts only, this will not fit a 6 speed propshaft as its longer. Billet gearbox mount. E9x DCT to Syvecs wiring harness. Need to go to a Syvecs S6+ or S7+ E9x DCT GEARBOX BILLET OIL COOLER ADAPTOR + BMW OEM Cooler outlet (You choose which you wish to use) BMW DCT Drivelogic Button Switch 7835039. Mounted a dash blanking (Tho has come from a painted dash) BMW DCT Transmission Gear Shifter 7842102. Dodson Motorpsoort BMW DCT Sportsman 900Nm clutch kit Installed in a E9x DCT box and only then done 60 miles before the box was removed from car). E9x DCT gearbox*** Gearbox included for FREE for reasons below I had the Dodson clutch kit installed in the box by Whifbitz when I bought the clutch kit. Occasional drip from where the cooler adaptor mount area apparently. Gearbox was working, but recently the cars cambus had issues and the gearbox got confused. Most likely due to the sketchy wiring of a certain tuner on my car than any issue with the box itself. Location: The gearbox, fitted with the clutch kit , billet cooler adaptor and rear mounting kit, plus Drivelogic button are all currently in Haywards Heath at SRD. All the other parts are currently in Oxfordshire with me. Price: £SOLD Edited December 12, 2023 by Big Mark SOLD (see edit history) 1 Link to comment Share on other sites More sharing options...
Recommended Posts