tintinmt Posted March 20, 2020 Share Posted March 20, 2020 I've had a lot of work on my N/A engine and had the ECU repaired. Between the two the garage adjusted the idle in an effort to keep the engine running whilst the ECU fault was there. Now that the ECU is fine I need to reverse the adjustment. They have told me it's a screw on the throttle body but I can't see it and can't find any help in the archives. Due to the above reasoning, I am very confident that nothing else is required. The car runs perfectly otherwise. Thanks in advance. Link to comment Share on other sites More sharing options...
Suprakeith Posted March 20, 2020 Share Posted March 20, 2020 I am in garage over weekend so can send you picture of adjustment screw if no one sends one before Link to comment Share on other sites More sharing options...
tintinmt Posted March 20, 2020 Author Share Posted March 20, 2020 That would be appreciated! Link to comment Share on other sites More sharing options...
mc92 Posted March 21, 2020 Share Posted March 21, 2020 It's the small grub screw with a locking nut I believe. Link to comment Share on other sites More sharing options...
tintinmt Posted March 21, 2020 Author Share Posted March 21, 2020 I should be able to find that! Thanks. Link to comment Share on other sites More sharing options...
tintinmt Posted March 22, 2020 Author Share Posted March 22, 2020 Sorted by adjusting the throttle cable adjustment screw (circled). Should've known all along. Thanks. Link to comment Share on other sites More sharing options...
Swampy442 Posted March 22, 2020 Share Posted March 22, 2020 There isn't an idle screw by the way, its set by the ECU, the stops are factory set and adjusted. You have a problem somewhere Link to comment Share on other sites More sharing options...
tintinmt Posted March 22, 2020 Author Share Posted March 22, 2020 No idle speed problems now. I just reversed what the garage did as a way around the previous issue cased by the faulty ECU. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now