K22SUP Posted April 8, 2018 Share Posted April 8, 2018 Hi guys I am reinstating an aftermarket oil cooler that needed changed I have also fitted a mocal thermostatic take off plate rather than non thermostatic which was there I just want to double check hose route with any of you I have it from going out sandwich plate to oil cooler from cooler to remote filter head then from filter back to sandwich plate I’d thus the best way or anyone any different routes Quote Link to comment Share on other sites More sharing options...
Mike2JZ Posted April 8, 2018 Share Posted April 8, 2018 Normally I go: Sandwich Plate > Remote Filter > Cooler > Sandwich plate Better to have filtered oil going to cooler rather than unfiltered incase you get any crud going into cooler. Quote Link to comment Share on other sites More sharing options...
K22SUP Posted April 9, 2018 Author Share Posted April 9, 2018 Normally I go: Sandwich Plate > Remote Filter > Cooler > Sandwich plate Better to have filtered oil going to cooler rather than unfiltered incase you get any crud going into cooler. Thanks mate it has never been that way but I might re route it Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted April 9, 2018 Share Posted April 9, 2018 Id have it the other way, filter after cooler, to pick up any crap that may come out of the cooler Quote Link to comment Share on other sites More sharing options...
K22SUP Posted April 9, 2018 Author Share Posted April 9, 2018 Id have it the other way, filter after cooler, to pick up any crap that may come out of the cooler Hi I work in Toyota dealer and the guy that does most of the work on it reckons the same filter last dilemma a suppose there isn’t a wrong or right Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.