jackso11 Posted August 24, 2017 Share Posted August 24, 2017 What kind of support should I have keeping the tailpipe from bouncing around? Had my exhaust of for ages and now seem to have no mounting point on the exhaust and a strange hook to try and connect it to do not the normal rubber blocks. Is it some kind of strap I need? Link to comment Share on other sites More sharing options...
shaky Posted August 24, 2017 Share Posted August 24, 2017 I did try and post a pic but no luck, there is a small bar on the back box , you use a rubber loop, to put it on with. Link to comment Share on other sites More sharing options...
jackso11 Posted August 25, 2017 Author Share Posted August 25, 2017 You are right, there is a bar. Do you know where I can get the rubber loop? does it go around both of those hooks in the picture somehow? Also, is that a an oem double hook thing or is it HKS? because by the looks of mine I need a new one. Link to comment Share on other sites More sharing options...
jackso11 Posted August 25, 2017 Author Share Posted August 25, 2017 Ok so I have found this.... http://parts.lakelandtoyota.com/showAssembly.aspx?ukey_assembly=507945&ukey_make=1060&ukey_model=15451&modelYear=1994&ukey_category=21648 does this mean I need 2 elastic bands? or do I just stretch one between the 2 hooks going over the bar on the exhaust? Link to comment Share on other sites More sharing options...
Burna Posted August 25, 2017 Share Posted August 25, 2017 The double hook is OEM, and you use two rubber donuts. Any exhaust place will have them mate. Link to comment Share on other sites More sharing options...
Burna Posted August 25, 2017 Share Posted August 25, 2017 Ok so I have found this.... http://parts.lakelandtoyota.com/showAssembly.aspx?ukey_assembly=507945&ukey_make=1060&ukey_model=15451&modelYear=1994&ukey_category=21648 does this mean I need 2 elastic bands? or do I just stretch one between the 2 hooks going over the bar on the exhaust? Like figure 3. Link to comment Share on other sites More sharing options...
jackso11 Posted August 25, 2017 Author Share Posted August 25, 2017 got you, so I need 2 donuts. Im starving. Link to comment Share on other sites More sharing options...
jackso11 Posted August 25, 2017 Author Share Posted August 25, 2017 Do they go on one of the hooks each and then over the bar, or do they stretch from one hook to the othergoing over the bar and then the same again withthe second one so just doubling up? Link to comment Share on other sites More sharing options...
Scooter Posted August 25, 2017 Share Posted August 25, 2017 Just one hook to the bar on each side, no looping right over, but you obviously need the right size rubber rings. So drivers side one goes on first and easily! then you'll probably need to push over the exhaust to get the second one up and over the chassis mounted hook, it's a bit of a need three hands job, or one of those hooks on a handle to help you stretch it. Link to comment Share on other sites More sharing options...
shaky Posted August 25, 2017 Share Posted August 25, 2017 Had mine crossed over or it will not sit correct , been a few years since i sold mine, you will soon find out when you put just one on where the other goes , get good quality ones . Link to comment Share on other sites More sharing options...
jackso11 Posted August 28, 2017 Author Share Posted August 28, 2017 Ordered from Toyota, probably twice what I needed to pay but still only a few quid each Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now