Mac Srt Posted May 23, 2017 Share Posted May 23, 2017 They don't suit the Supras interior at all though. Too brash and too square. They are little bit bulky but i quite like the all black versions and for that sort of money they don't break the bank. They also give the car a more modern look inside and they have to be more comfortable that my OEM facelift seats Quote Link to comment Share on other sites More sharing options...
foggy147 Posted May 28, 2017 Author Share Posted May 28, 2017 Found a pair of recaro trendlines, what rails are needed to fit these as a direct fit into a facelift Supra? Wanna see how much it's going to cost in total before I bite the bullet! Quote Link to comment Share on other sites More sharing options...
Spunkmeyer Posted May 29, 2017 Share Posted May 29, 2017 Just take care with trendlines, I fitted a beautiful set in mine and drove down the rd with my head sticking out the window. You'd best be under 6ft as the bump on the bottom of trendlines prevents low mount options. I used the supra frames from GSM and was no good height wise. Quote Link to comment Share on other sites More sharing options...
foggy147 Posted May 29, 2017 Author Share Posted May 29, 2017 Just take care with trendlines, I fitted a beautiful set in mine and drove down the rd with my head sticking out the window. You'd best be under 6ft as the bump on the bottom of trendlines prevents low mount options. I used the supra frames from GSM and was no good height wise. /QUOTE] That's good advise then as I'm about an inch shy of 6ft! Would these be ok at that height? Found a lovely pair for a good price think they would look perfect! Quote Link to comment Share on other sites More sharing options...
Spunkmeyer Posted May 29, 2017 Share Posted May 29, 2017 PMd the member who had the set off me. May be worth a test sit. You'll be probably ok at 6ft / under but you'll be sat quite high up. Quote Link to comment Share on other sites More sharing options...
foggy147 Posted June 11, 2017 Author Share Posted June 11, 2017 Seen some recaro speeds close by , if I bought the bride from whifbitz these would be a direct fit? Also in terms of removing the current rails, how easy is it? Are they welded to the floor or bolted down? Quote Link to comment Share on other sites More sharing options...
conorj Posted June 11, 2017 Share Posted June 11, 2017 Each seat is held down by 5 bolts, easy to remove. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.