brom86 Posted June 13, 2016 Share Posted June 13, 2016 Had the car in the garage today and the sensor/probe which goes into the 1st cat has split from the cat ever so slightly causing a blow. What's the best way to fix this. Can u buy a new sensor housing and screw it back into the cat or go decat with a new sensor flange Link to comment Share on other sites More sharing options...
Wez Posted June 13, 2016 Share Posted June 13, 2016 Get rid of the cat and tuck the sensor out the way Link to comment Share on other sites More sharing options...
Rob W Posted June 13, 2016 Share Posted June 13, 2016 It's just a cat overheat sensor. As Wez said, tuck it up out the way or cut it then pull it back through the tunnel and get a decat pipe. Link to comment Share on other sites More sharing options...
Mike2JZ Posted June 13, 2016 Share Posted June 13, 2016 I just welded the gap on mine as I wasn't able to find any other way aside from getting another cat Link to comment Share on other sites More sharing options...
brom86 Posted June 13, 2016 Author Share Posted June 13, 2016 It's just a cat overheat sensor. As Wez said, tuck it up out the way or cut it then pull it back through the tunnel and get a decat pipe. Won't it throw up a light on the dash? Link to comment Share on other sites More sharing options...
Wez Posted June 13, 2016 Share Posted June 13, 2016 Won't it throw up a light on the dash? Yes, the cat temp sensor light, you can either pull the bulb or unpin it from memory. Link to comment Share on other sites More sharing options...
brom86 Posted June 13, 2016 Author Share Posted June 13, 2016 Yes, the cat temp sensor light, you can either pull the bulb or unpin it from memory. Haha eh?? Link to comment Share on other sites More sharing options...
brom86 Posted June 16, 2016 Author Share Posted June 16, 2016 (edited) 100% if i pull the sensor out and tuck it away and weld the hole it won't throw a light on in the dash??? Edited June 17, 2016 by brom86 (see edit history) Link to comment Share on other sites More sharing options...
Mike2JZ Posted June 17, 2016 Share Posted June 17, 2016 Just cut the sensor wires, it wont make the light appear. Then you don't have to worry about tucking the sensor out the way, as there is barely anywhere to put it Link to comment Share on other sites More sharing options...
brom86 Posted June 17, 2016 Author Share Posted June 17, 2016 No worries cheers mate Link to comment Share on other sites More sharing options...
martincoupe Posted June 17, 2016 Share Posted June 17, 2016 cut mine and went decat best thing ever pop pop pop Link to comment Share on other sites More sharing options...
Chris Wilson Posted June 17, 2016 Share Posted June 17, 2016 If it's goi8ng pop, pop pop there's an air leak into the exhaust and dependent upon where it is it may throw the O2 sensor signal out of kilter. Link to comment Share on other sites More sharing options...
brom86 Posted June 17, 2016 Author Share Posted June 17, 2016 Nor having pop pop just horrible driving with the sound from the hole Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now