coza Posted May 15, 2016 Share Posted May 15, 2016 Hi I've recently installed a boost controller and since doing that I've got no second turbo kicking in ? Any ideas ? Link to comment Share on other sites More sharing options...
Graham1984 Posted May 15, 2016 Share Posted May 15, 2016 You're NA. Link to comment Share on other sites More sharing options...
masterfett Posted May 15, 2016 Share Posted May 15, 2016 You're NA. haha. most likely its not installed correctly, double check everything you have done. if all else fails return to stock and see if it works then, if it does then i'd say its an issue with the installation. Link to comment Share on other sites More sharing options...
coza Posted May 15, 2016 Author Share Posted May 15, 2016 No haha , the sequential turbos worked before I installed it , is there any pipes that have to be changed for the 2nd turbo ? Link to comment Share on other sites More sharing options...
coza Posted May 16, 2016 Author Share Posted May 16, 2016 So put back all pipes like normal and both turbos are back , When I installed the solenoid I blocked of the vsv and waste gate vsv was there any more pipes in meant to connect to the solenoid ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now