Timlowthian Posted May 30, 2015 Share Posted May 30, 2015 Hi all just wondering if there is a way you can check to see if an engine has UK turbos? Reason I ask is have just fitted a TT engine to my na which I presumed was a j spec because of the ECU. However after going to fit the decat I have it would appear to be far too small. Am I right in thinking the UK spec uses a larger diameter decat? Link to comment Share on other sites More sharing options...
jza800 Posted May 30, 2015 Share Posted May 30, 2015 you can see it on the turbo.. if it is boltet to the manifold with 4 bolts = eu spec 3 bolts= j-spec does i have a maf sensor= eu spec if only map sensor = j-spec does i have a resister box in the intake side = eu spec if only igniter box =j-spec if it have the raised bump in left side on the top off the intake manifold = eu spec if the rasied bump is is the middel off the intake = j-spec if the engine have egr valves on the back off the intake = eu spec if not= j-spec or post a picture off the engine Link to comment Share on other sites More sharing options...
Timlowthian Posted May 30, 2015 Author Share Posted May 30, 2015 The engine itself is definitely a J-spec engine It was more the turbos I was wondering about. The 1st decat was just to small to bolt up. Link to comment Share on other sites More sharing options...
Dim Sum Posted May 30, 2015 Share Posted May 30, 2015 The UK spec 2nd decat has a three bolt flange rather than the 2 bolt flange Link to comment Share on other sites More sharing options...
Swampy442 Posted May 30, 2015 Share Posted May 30, 2015 Like the man said :- you can see it on the turbo.. if it is bolted to the manifold with 4 bolts = eu spec 3 bolts= j-spec Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now