2JZMKIV Posted March 30, 2015 Share Posted March 30, 2015 Hello everyone, I own a 96 bpu tt with stock engine and stock turbos i use 10w60 mobil 1 but im concerned with my oil pressure readings from my defi gauge usually with full throttle it goes up to 8 bars but i remember i watched video of a built rb26dett and it was only reading 6 bars at full throttle i know a lot of thing changes 2jz and rb26 is not the same but 2 bar difference scares me should i go for 0w-40 or 5w-30 instead ? Thanks in advance for any helpful and useful information. Link to comment Share on other sites More sharing options...
chrispot Posted March 31, 2015 Share Posted March 31, 2015 8 bar sounds hi to me if the oil is at normal temp. i think mine has about 5 to 6. i would change oil for 5w 40 or 10w 40 fully synthetic regards chris Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted March 31, 2015 Share Posted March 31, 2015 I thought this was answered here, http://www.mkivsupra.net/vbb/showthread.php?303290-Oil-pressure-on-2jzgte/page3 Just change the 10w60 for a 10w40 and stop worrying. Link to comment Share on other sites More sharing options...
2JZMKIV Posted March 31, 2015 Author Share Posted March 31, 2015 Thanks and thanks for providing the link i know i worry excessively its a minor anxiety disorder im trying to deal with. Link to comment Share on other sites More sharing options...
Kaan W Posted April 1, 2015 Share Posted April 1, 2015 My single used to read up to 9bar on full throttle. Link to comment Share on other sites More sharing options...
Hemanhead Posted April 1, 2015 Share Posted April 1, 2015 My single used to read up to 9bar on full throttle. I see around 8 bar on full throttle also. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now