j_jza80 Posted March 22, 2015 Share Posted March 22, 2015 I need to install the wideband sensor for my gauge, and for simplicity I want to install it into one of my decat pipes. From what I've seen, the second pipe is the one that most use, but is there a reason why I can't use the 1st decat pipe? I'm just thinking down the line that I May end up befitting the second cat at some point. Cheers Link to comment Share on other sites More sharing options...
bignum Posted March 22, 2015 Share Posted March 22, 2015 There`s not much room around the 1st cat iirc and the sensor needs to be mounted on the top of the pipe so moisture can`t damage it, also further away from the engine is better for the sensor for heat purposes. Link to comment Share on other sites More sharing options...
themodifiedkid Posted March 22, 2015 Share Posted March 22, 2015 I have mine roughly mid way along the second decat Link to comment Share on other sites More sharing options...
wile e coyote Posted March 22, 2015 Share Posted March 22, 2015 Mines at the end near the bend of the second chris Wilson decat Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted March 22, 2015 Share Posted March 22, 2015 When I ran BPU, and later TTC with hybrids I mounted the wideband sensor in the second decat, but after going single I mounted it in the down pipe, never had any over heat problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now