barneybrendan Posted June 29, 2014 Share Posted June 29, 2014 Think I messed up my timming when I had dizzy off and crank pulley off. Car wont fire up now. I have a total mental blank on how to get it to fire at the moment. Link to comment Share on other sites More sharing options...
buster Posted June 29, 2014 Share Posted June 29, 2014 Crank pulley lined up to 0 I think And cam lines matched to the v shape bumps behind the pulleys at the top Hope this helps Link to comment Share on other sites More sharing options...
Rich.2211 Posted June 29, 2014 Share Posted June 29, 2014 Set the engine to TDC. Line the marks up on the distributor and fit it in without tightening the securing nut up. Get the engine up to temp. Bridge pins TE1 and E1 in the diag port and get a timing light to set the ignition timing to 10 degrees. Link to comment Share on other sites More sharing options...
barneybrendan Posted June 30, 2014 Author Share Posted June 30, 2014 All sorted now Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now