eyefi Posted February 18, 2002 Share Posted February 18, 2002 does anyone have a list of wheels that are available in correct offset & width (maybe 10" rears) for the sup that will fit over uk brakes? is the any way to tell if a set of wheels will fit over uk brakes without trying them on? ta Link to comment Share on other sites More sharing options...
eyefi Posted February 19, 2002 Author Share Posted February 19, 2002 ok so if no one has a list what wheels have you got over UK brakes? Link to comment Share on other sites More sharing options...
Branners Posted February 19, 2002 Share Posted February 19, 2002 The problem is you just cant be sure what will and what wont fit. There are various measurements around that give an idea but the calipers are just so large that you have to actually try a set of wheels on a car with the UK brakes to make sure. Thats why Im going to stock 17s so I can be sure they will fit, they might not be everybodys choice of wheels but I think they look pretty good and will do me for a while. JB Link to comment Share on other sites More sharing options...
Alex Posted February 19, 2002 Share Posted February 19, 2002 I believe the distance from the bottom of the studs to the back of the spokes where the caliper will run (about 6"s out???) must be at least 48mm if not more. and its a 114.3mm 5 stud pattern. Hope that's correct and gives you something to go on. Link to comment Share on other sites More sharing options...
eyefi Posted February 19, 2002 Author Share Posted February 19, 2002 cheers guys its a start. this is turning into a nightmare, does the same problem exist with brembo / ap / etc kits, or is it just the uk brakes that stick out so far. so its the old catch22, cant put the brakes on cos the wheels i have wont fit, cant test wheels cos i cant put the brakes on.......hmmmm. also every wheel web site with a fitment guide brings up nothing for supra or a load of missized cr@p that wont fit or is 7" wide. there's not alot out there thats correct sizes, nevermind clears the big calipers. Link to comment Share on other sites More sharing options...
Adam W Posted February 20, 2002 Share Posted February 20, 2002 I think that BIG brakes kits make the job even more difficult - AP brakes were designed to be used with Blitz Z1's I think and there's not a lot else that will fit them. I dunno, after reading about all the deforming, ill-fitting, corroding, expensive, hard to find wheels that people have bought, don't the stock ones seem awfully tempting? Link to comment Share on other sites More sharing options...
Alex Posted February 20, 2002 Share Posted February 20, 2002 Possibly if Toyota had put a kind of hub in the front wheel like there is in the rear one (which holds the handbrake) then fitment would be easier as its finding the correct off set which is hardest. Link to comment Share on other sites More sharing options...
eyefi Posted February 20, 2002 Author Share Posted February 20, 2002 Quote: from Adam Wootten on 10:28 am on Feb. 20, 2002[br]I think that BIG brakes kits make the job even more difficult - AP brakes were designed to be used with Blitz Z1's I think and there's not a lot else that will fit them. I dunno, after reading about all the deforming, ill-fitting, corroding, expensive, hard to find wheels that people have bought, don't the stock ones seem awfully tempting? yes, see the post in for sale / wanted. anyone any ideas where i might get some from (having just missed out on 2 members sets). There must be quite a few sets laying around taking up space Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now