mull1986 Posted August 6, 2013 Share Posted August 6, 2013 Good day all, I woke up this morning to condensation in one of my facelift headlights, would I be right is assuming that the seal on these have broken down and that means I need to split them and re-seal it? Has this happened to anyone else? Many thanks in advance Gaz Link to comment Share on other sites More sharing options...
drift_bear Posted August 6, 2013 Share Posted August 6, 2013 Have you checked that all the bulb holders are in proper and secure? Link to comment Share on other sites More sharing options...
listy Posted August 6, 2013 Share Posted August 6, 2013 Have you checked that all the bulb holders are in proper and secure? Having split one of my lights the other day, I would be extremely surprised if the seal has broken. It takes a bit of effort to split them after having them in the oven!!! Link to comment Share on other sites More sharing options...
mull1986 Posted August 6, 2013 Author Share Posted August 6, 2013 All bulb holders are present and correct. Confused?? Me too!! Link to comment Share on other sites More sharing options...
spidermonkey Posted August 6, 2013 Share Posted August 6, 2013 Are headlights supposed to be fully sealed? Link to comment Share on other sites More sharing options...
mull1986 Posted August 6, 2013 Author Share Posted August 6, 2013 There are 2 small breather pipes on the back of them which should allow some air flow around the headlight so i would say no which makes me think there's more to this than it may seem. E.g a slight crack in the seal allowing water in maybe. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now