Guest suprageek Posted July 9, 2013 Share Posted July 9, 2013 had one of these lying around so i thought id try fit it today.. so the kit has 2 blue wires and a red and a black wire coming from the relay box! my sup is a 93 tt j spec supra as i understand the ignition wiring is as follows white - 12v white & red - 12v no2 pink & blue - ACC black & yellow - ign1 black & orange - ign 2 black & white - starter so where do the wires go, i have the black earthed but thats it! any help would be much appreciated! Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted July 9, 2013 Share Posted July 9, 2013 Might help Quote Link to comment Share on other sites More sharing options...
ashbuster Posted July 10, 2013 Share Posted July 10, 2013 lol Quote Link to comment Share on other sites More sharing options...
Guest suprageek Posted July 10, 2013 Share Posted July 10, 2013 Might help I seen this video of these two twats doing it thanks anyway Quote Link to comment Share on other sites More sharing options...
ashbuster Posted July 10, 2013 Share Posted July 10, 2013 (edited) lol thats how to do it so ideally you could do with a multimeter did you have any instructions with it which wires are for what Edited July 10, 2013 by ashbuster (see edit history) Quote Link to comment Share on other sites More sharing options...
Guest suprageek Posted July 10, 2013 Share Posted July 10, 2013 cheers mate done it, dont know why i bothered lol used multimeter just thought id try to get a quick answer on here first lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.