sideexitsupra Posted April 28, 2013 Share Posted April 28, 2013 Hi guys, Now the roll cage is out I am going back to std seat belts rather than harnesses. I have a pair of Recaro Pole Position seats and the stock clips will not fit. The hole on the clips is much bigger than the bolt on the seats. I guess I will need the clips of from another car? Anyone know what I can use? In the meantime some stock seats will be going in. I await words of wisdom as I'm sure others must have come across this problem when fitting replacement seats. Link to comment Share on other sites More sharing options...
listy Posted April 28, 2013 Share Posted April 28, 2013 When I had the Corbeaus in, I used the threaded bolt hole, on the trans tunnel, where one of the stock frame bolts went. Link to comment Share on other sites More sharing options...
Rajinder Posted April 28, 2013 Share Posted April 28, 2013 Had the same problem when fitting my Recaro. I used the OEM belt clip and inserted a thick washer of the same thickness and size as the bolt and the clip hole. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now