supra900bhp Posted April 4, 2013 Share Posted April 4, 2013 I'm in rebuild mode and slowly getting there but in d/s foot well there is a fuse box with 1 block that I can find no wiring or what should go in it!! looks like this cheers guys! Link to comment Share on other sites More sharing options...
Kaan W Posted April 4, 2013 Share Posted April 4, 2013 (edited) I think its an engine bay loom plug that should be orange. What year is the car? Edited April 4, 2013 by Kaan W (see edit history) Link to comment Share on other sites More sharing options...
supra900bhp Posted April 4, 2013 Author Share Posted April 4, 2013 I think its an engine bay loom plug that should be orange. this is the bottom of fuse box and 99% sure I fitted all the plugs back in but just this one?? may have to unplug them and make sure when I poked loom back in it did not slip down the side or something stupid! cheers kaan you help me out the poo again lol Link to comment Share on other sites More sharing options...
Kaan W Posted April 4, 2013 Share Posted April 4, 2013 (edited) Actually looking at the manuals it should be blue and is a (Engine Room Main Wire and Cowl Wire). By the looks of it the wire should run behind the heater matrix accross to the other footwell and connect to a blue 5 pin connector. Edited April 4, 2013 by Kaan W Wrong info (see edit history) Link to comment Share on other sites More sharing options...
Kev.O Posted April 4, 2013 Share Posted April 4, 2013 I believe the colour should be yellow and its marked in the manual as cowl wire. I think it runs across just behind the dash as opposed to between the firewall and dash. Link to comment Share on other sites More sharing options...
supra900bhp Posted April 4, 2013 Author Share Posted April 4, 2013 arse!! I only put all the dash back in last week well will have to have a real good dig around under there if not the poxy lots gonna just have to come back out again!! well gives me something to do on saturday then cheers guys!!!! Link to comment Share on other sites More sharing options...
Kev.O Posted April 4, 2013 Share Posted April 4, 2013 The wire attaches to the back of the dash so you might be able to see it with the dash in place. Link to comment Share on other sites More sharing options...
supra900bhp Posted April 4, 2013 Author Share Posted April 4, 2013 I really hope so mate as I really really need this and everything else sorted for the dragonball!!! Link to comment Share on other sites More sharing options...
Kaan W Posted April 4, 2013 Share Posted April 4, 2013 I really hope so mate as I really really need this and everything else sorted for the dragonball!!! It shouldnt be that hard to find as its joined to most of the other connectors around the fuse box including the wide white one with taped wires in your second pic mate. Did you buy the new loom or modify it, you didnt chop it off did you? lol. Link to comment Share on other sites More sharing options...
supra900bhp Posted April 4, 2013 Author Share Posted April 4, 2013 It shouldnt be that hard to find as its joined to most of the other connectors around the fuse box including the wide white one with taped wires in your second pic mate. Did you buy the new loom or modify it, you didnt chop it off did you? lol. knowing me mate anything is pos lol well its giving me some hope that when I changed dash's over (as mine was crappy and screw holes) I removed my old loom and refitted into new dash so its gonna be in there its just playing silly buggers with me! Link to comment Share on other sites More sharing options...
Hartmann Posted April 4, 2013 Share Posted April 4, 2013 i have just put my dash in my jap-spec ... and there was no such plugt to connect .. think its there but it doesent wire to anything that i can remember ... there ar 3 plugs for the dash 1 orange 1 white 1 blue ... and no one in that style connector Link to comment Share on other sites More sharing options...
supra900bhp Posted April 4, 2013 Author Share Posted April 4, 2013 i have just put my dash in my jap-spec ... and there was no such plugt to connect .. think its there but it doesent wire to anything that i can remember ... there ar 3 plugs for the dash 1 orange 1 white 1 blue ... and no one in that style connector Mine is j-spec to I also have the old loom I just dug out the spares pile so will offer it up on saturday and have a real good look before I start taking anything apart thats why was asking all you guys on here! thank you for your help to Link to comment Share on other sites More sharing options...
RobUK Posted April 4, 2013 Share Posted April 4, 2013 Is it the loom from the door maybe? Link to comment Share on other sites More sharing options...
Kev.O Posted April 4, 2013 Share Posted April 4, 2013 According to the wiring diagram it internally connects to another loom that goes to the dials. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now