Caesard Posted February 22, 2013 Share Posted February 22, 2013 In the process of rebuilding my car, I need to powder coat most of the suspension bits and some bits from the engine. 2 colours only. Is there any member here who does sandblasting and powder coating and who can give me a batch quote for the entire job? Saves me buying or making sandblasting and powder coating equipment. Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted February 22, 2013 Share Posted February 22, 2013 Ibrar is your man! his work is by far the best i have seen Link to comment Share on other sites More sharing options...
Dnk Posted February 22, 2013 Share Posted February 22, 2013 I'd have thought you will need to strip any suspension parts that have ball joints and bushes in them as they will all go into an over at 180 C I'd imagine the bushes will be scrap along with the ball joint covers and the grease inside them unless removed before hand Ibrar is the man to speak to as he did all this on his red widebody Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now