Slam Posted January 27, 2013 Share Posted January 27, 2013 Hi all,just bought a pair of cam covers, when i opened the parcel there was a broken bit of pipe floating in the box. now i intend to get these done up,but i need to kno if this part is repairable. The plate inside the cover seams to have some sealent around it. The said pease of pipe go's to the inlet manifold. Link to comment Share on other sites More sharing options...
Fly Posted January 27, 2013 Share Posted January 27, 2013 Looks like a breather pipe to me Link to comment Share on other sites More sharing options...
Slam Posted January 27, 2013 Author Share Posted January 27, 2013 Looks like a breather pipe to me Do these just pop on & off,or dose the plate inside need to come off Link to comment Share on other sites More sharing options...
Dnk Posted January 27, 2013 Share Posted January 27, 2013 If its like the one way valve on the inlet cover on a tt then it could just push into place inside a rubber grommet/seal that fits in the cover Link to comment Share on other sites More sharing options...
David P Posted January 27, 2013 Share Posted January 27, 2013 Same part, pull out, push in. Link to comment Share on other sites More sharing options...
Slam Posted January 27, 2013 Author Share Posted January 27, 2013 Thanks for the info. will give it a pull. Link to comment Share on other sites More sharing options...
Slam Posted January 27, 2013 Author Share Posted January 27, 2013 Ok i have pulled the valve out,now i am left with a rubber insert.Now i am looking at getting these powder coated so dose this rubber sleave have to come out,Hope to get them bead blasted aswell,any advise on all this would be great. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now