injector sizes for hybrids

[supradibbs]

for use with the following mods:

 

envy stage 3 hybrids

full decat apexi gt exhaust

blitz filter

greddy 2 row intercooler

ik 24 plugs

walbro pump

SAFC

AVCR

Aeromotive FPR

trl fcd

 

Now i was going for the obvious and fit UK 550cc with a resistor pack but after talking it over with a reliable source have been offered a set of direct plug in 660cc injectors iam assured that these will be fine with the safc and would not require emange or such like to control.

 

How does the puplic feel on this anyone had simalar setup just want to be double sure

 

cheers chaps

[GeordieSteve]

Nope they wont. 550's with hybrids. 660's can't be cut down enough by the S-AFCII. I'm sadly living proof!

[supradibbs]

hummm ok i guess 550cc then but iam getting mixed reports some from very reliable sources damm ireally dont know what to do

[GeordieSteve]

I had mine set up at Thor with 650's and S-AFCII. They couldn't get it set up correctly. One minute is was underfueling and getting DET, the next it was overfueling and bogging down mid range. They told me to go buy an e-manage to do the job

[GeordieSteve]

http://www.mkivsupra.net/vbb/showthread.php?t=39363&highlight=fueling

[Steve]

Think Nic could get the new emanage ultimate reasonbly priced.

[Ian C]

I had mine set up at Thor with 650's and S-AFCII. They couldn't get it set up correctly. One minute is was underfueling and getting DET, the next it was overfueling and bogging down mid range. They told me to go buy an e-manage to do the job

 

I'm glad someone else has ratified what I've been sort of saying for a while now

 

-Ian