slugger1 Posted May 16, 2012 Share Posted May 16, 2012 I've been having a few issues with my heater. Below is a brief summary of what has happened so far: 1). The heater was taking ages to warm up and only really got to a luke warm state, however it seemed to improve at speed 2). I have checked the actuator arm and that seems fine 3). From yesterday the light on the fan control went off and will only come on again if I turn the temp guage right down 4). Temp guage from the engine is normal (never goes above half way) So do people think it is the matrix (hope not!) or the thermostat that needs changing? Any advice welcome. Cheers, Stuart Link to comment Share on other sites More sharing options...
David P Posted May 16, 2012 Share Posted May 16, 2012 (edited) Take the stat out and test it by bringing to the boil in a saucepan of water, you will see if it's working properly or not. Edited May 16, 2012 by David P (see edit history) Link to comment Share on other sites More sharing options...
slugger1 Posted May 16, 2012 Author Share Posted May 16, 2012 Take the stat out and test it by bringing to the boil in a saucepan of water, you will see if it's working properly or not. Cheers. Will give that a go. I presume it's quite easy to get at? Link to comment Share on other sites More sharing options...
David P Posted May 16, 2012 Share Posted May 16, 2012 Undo 2 X 12mm nuts and it's out. Link to comment Share on other sites More sharing options...
slugger1 Posted May 16, 2012 Author Share Posted May 16, 2012 Cheers. Might give it a go this weekend. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now