Pig Posted April 26, 2012 Share Posted April 26, 2012 This pic is gates at 1.8 meters each side. I need 1 at 3.3 meters and 1 and 1.2 meters (roughly) as I want to order them as A semetrical gates but not sure how they are going to look like... Can you please help? also, if I get a pic of the gate way at home, would you be able to photoshop into the actual location? Thanks Jon (image if not attached is: http://www.gatewrights.co.uk/Charmgate.html) For the record, if anone has an opinion on a better gate that will work as an A semetrical pair please share it - I dont want a 5 bar anymore. Fancy a change Quote Link to comment Share on other sites More sharing options...
Pig Posted April 27, 2012 Author Share Posted April 27, 2012 Bump please. Quote Link to comment Share on other sites More sharing options...
Soopra Posted April 27, 2012 Share Posted April 27, 2012 the original pic is too small to photoshop properly Quote Link to comment Share on other sites More sharing options...
Soopra Posted April 27, 2012 Share Posted April 27, 2012 does this help? http://www.oakleafgates.co.uk/media/galleries/Automation/CHAPMAN-REAR.jpg Quote Link to comment Share on other sites More sharing options...
Aero-M Posted April 27, 2012 Share Posted April 27, 2012 If you want them automated I can do you a very good deal on gate rams. Quote Link to comment Share on other sites More sharing options...
Pig Posted April 29, 2012 Author Share Posted April 29, 2012 does this help? http://www.oakleafgates.co.uk/media/galleries/Automation/CHAPMAN-REAR.jpg Yes, it does a little, although the look pretty rubbish a semetrical. So its not poss to do with that size pic? Quote Link to comment Share on other sites More sharing options...
Pig Posted April 29, 2012 Author Share Posted April 29, 2012 If you want them automated I can do you a very good deal on gate rams. Going for the under ground jobbies, do you do them? Quote Link to comment Share on other sites More sharing options...
Soopra Posted April 29, 2012 Share Posted April 29, 2012 Yes, it does a little, although the look pretty rubbish a semetrical. So its not poss to do with that size pic? asymmetrical the original picture is far too small to photoshop - sorry Quote Link to comment Share on other sites More sharing options...
Noz Posted April 29, 2012 Share Posted April 29, 2012 or if you want to be even better with paint skills i didnt want to use photoshop, a challenege is to use the simplest tool For any other windows paint application requirements, please PM me. I am open for contract work after 6pm most evenings and weekends. Quote Link to comment Share on other sites More sharing options...
Aero-M Posted April 30, 2012 Share Posted April 30, 2012 Going for the under ground jobbies, do you do them? Hi, yes I do fit them. When your ready give me a call on 07768036868. Thanks martyn. Quote Link to comment Share on other sites More sharing options...
lust2luv Posted May 1, 2012 Share Posted May 1, 2012 Might not have got the dimensions exactly right, but is this any good? [ATTACH=CONFIG]150899[/ATTACH] Quote Link to comment Share on other sites More sharing options...
Pig Posted May 1, 2012 Author Share Posted May 1, 2012 Hi, yes I do fit them. When your ready give me a call on 07768036868. Thanks martyn. What's your website please mate? I have had a local guy out to discuss and price up. Would def. be up for a chat. Might not have got the dimensions exactly right, but is this any good? [ATTACH=CONFIG]150899[/ATTACH] Thank you very much and to others that helped. You have saved me from making a big and very expensive mistake. I don't like them at all!!! Back to the drawing board, I know this is a car forum but it is the only forum I have ever been a proper active member on and clearly this shows why. A one stop shop Quote Link to comment Share on other sites More sharing options...
probrox Posted May 1, 2012 Share Posted May 1, 2012 Its http://www.garage-doorman.co.uk/ Quote Link to comment Share on other sites More sharing options...
listy Posted May 1, 2012 Share Posted May 1, 2012 What about if you take the top of the verticle edges off? Looks a lot better imo and not so out of place. Pic attached Also used paint......amazing Quote Link to comment Share on other sites More sharing options...
Aero-M Posted May 1, 2012 Share Posted May 1, 2012 Its http://www.garage-doorman.co.uk/ Thanks mate. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.