Smoke_U Posted August 30, 2011 Share Posted August 30, 2011 Hi. My overdrive buton stoped working today. It doesn't change to 4th gear. Any ide where to look first? Link to comment Share on other sites More sharing options...
mellonman Posted August 30, 2011 Share Posted August 30, 2011 check if the button works or not with a meter, would be a good start, i take it the od off is lit up on the dash? Link to comment Share on other sites More sharing options...
Smoke_U Posted August 31, 2011 Author Share Posted August 31, 2011 The strange thing is it worked fine the way home and also this morning. Could it have some thing to do with the transmition fluid? It's at normal level. Maby time for an oil change? Link to comment Share on other sites More sharing options...
mellonman Posted August 31, 2011 Share Posted August 31, 2011 is it the button faulty, is the od off alight on the dash? you need to answer these questions first. Link to comment Share on other sites More sharing options...
Smoke_U Posted August 31, 2011 Author Share Posted August 31, 2011 I changed the mph to TRD 320km/h dials. And its for a manual, so i can´t se if its on or not. Why did u buy 320km/h dials thats ment to be in a manual I hear you say. Becaus, this dude, caled: First name D1ck! Last name Head! Sead to me: NnnooOoo... Why u need to se P.N.D.2.1. in the dash when you can se it next to the gear stick. I argued a bit... But he made me an offer to throw in the smal dials that goes round the heater knob and fan speed. But in fackt they were already seald in the bag they came in... Thanks mr Head!! Link to comment Share on other sites More sharing options...
scotty71 Posted August 31, 2011 Share Posted August 31, 2011 looks like you are Mr Richard Head for fitting it Just dont take any advice off Peter File or Charlie Chester and you will be ok Link to comment Share on other sites More sharing options...
David P Posted August 31, 2011 Share Posted August 31, 2011 Should checking the obvious not find the fault, I believe there is a sensor that prevents OD engaging until fluid is over a certain temp, but not heard of a failure before. Link to comment Share on other sites More sharing options...
mellonman Posted September 1, 2011 Share Posted September 1, 2011 special this one as you cant see if its on or not drive the car and see if it changes into 4th if it dont press the od button then see if it does Link to comment Share on other sites More sharing options...
Smoke_U Posted November 22, 2011 Author Share Posted November 22, 2011 Ha ha. Time for an update. Haven´t been on the forum for a wile and saw(?) this old thread. It turned out that i pushed the MAN button with my little finger by mistake. Same thing happened a gen and i realized what sausage fingers i had. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now