DuaneT.Turbo Posted April 26, 2011 Share Posted April 26, 2011 Hey, On the way to the BDC on saturday i had a large vibration rattling the whole car, but on the way back it went away virtually unless i was braking... I got home and had a look under the car and to my suprise 2 out of the 3 bolts holding the prop to the diff were held on by about 1 thread [sHOCK][/sHOCK] has anybody else had this problem with them coming loose? D Link to comment Share on other sites More sharing options...
w41k3r Posted April 26, 2011 Share Posted April 26, 2011 i recently had my drive shaft bolts 5 on 1 side fall out i was very shocked to say the least Link to comment Share on other sites More sharing options...
Kirk Posted April 26, 2011 Share Posted April 26, 2011 Surely then that's down to removal and then not correctly tightened up again afterwards. Link to comment Share on other sites More sharing options...
Thorin Posted April 26, 2011 Share Posted April 26, 2011 Surely then that's down to removal and then not correctly tightened up again afterwards. I would hope so, but I think I'll check mine anyway! Link to comment Share on other sites More sharing options...
DuaneT.Turbo Posted April 26, 2011 Author Share Posted April 26, 2011 Surely then that's down to removal and then not correctly tightened up again afterwards. I'd have thought that, i've had the car since about January though and never done any work, not sure if the nuts are nylon lock nuts but i think i might invest in some.... Link to comment Share on other sites More sharing options...
w41k3r Posted April 27, 2011 Share Posted April 27, 2011 Surely then that's down to removal and then not correctly tightened up again afterwards. you could say that but bare in mind this is after my gearbox drain plug mysteriously fell out and that had never been touched as far as im aware ??? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now