mr two Posted March 20, 2011 Share Posted March 20, 2011 Hi All Dipped my auto - box yesterday and when its cold the level is way above the "hot" marking!! What effect will this have on my gearbox?? Link to comment Share on other sites More sharing options...
Swampy442 Posted March 20, 2011 Share Posted March 20, 2011 Was the engine running? It should be... Link to comment Share on other sites More sharing options...
mr two Posted March 20, 2011 Author Share Posted March 20, 2011 good question Swampy - no it wasn't, didn't realise it should be.....i'll try it again .... thanks Link to comment Share on other sites More sharing options...
Swampy442 Posted March 20, 2011 Share Posted March 20, 2011 No worries, To properly check your fluid, start engine, go slowly through all the gears back to P, leave engine running and check fluid. Probably find its ok Link to comment Share on other sites More sharing options...
Rajinder Posted March 20, 2011 Share Posted March 20, 2011 Mine is at the hot mark when cold. Never gave me any problems. Link to comment Share on other sites More sharing options...
pezzler Posted March 20, 2011 Share Posted March 20, 2011 Mine is at the hot mark when cold. Never gave me any problems. + 1 Link to comment Share on other sites More sharing options...
mr two Posted March 30, 2011 Author Share Posted March 30, 2011 checked with engine running and it seems ok, thanks Link to comment Share on other sites More sharing options...
David P Posted April 4, 2011 Share Posted April 4, 2011 The 'full cold' mark is about level with the join sump to casting, there is a lot of space above this before there are any moving parts, I run mine 1 litre over without issue, but it will be the drag/track users experience that will tell. I posted some pics of this yesterday in my Supracharger build thread. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now