clutch for 3.4 stroker, HKS twins?

[bodilx6]

A friend of mine is running HKS twins on a 3.4 stroker kit. Up to now he has been using a very expensive triple plate clutch for it to be streetable.

 

He puts a lot of miles on it (10.000+ miles a year) and therefore needs a clutch that is as easy as possible for street use, but still can hold the aprox 750hp/660lb/ft.

 

Now, the current clutch (don't remember the name) only lasts for a season or so with his demand for miles and it is rebuildable only once. Replacement is 3000£ or so.

 

So... Is there anyone with some suggestions for clutches that will live up to this?

 

• Cheaper than 3000£
  
• Hold 750hp and up towards 700 lb/ft
  
• Easy to live with/No race clutches (he has no problems with noisy clutches though)
  
• As long lasting as possible (even though the car is driving quite hard)
  

[johnny g]

I'd go for a carbon RPS Twin Plate model if that was me.

[Guest Budz86]

Speak to LeeP as he is running a big HKS twin setup, although he only use's it rarely. According to his garage he run's a blitz twin plate.

[Terminator]

Considering the OS Giken Triple plate a race clutch, it is very drivable on the street.

[AlanM]

Considering the OS Giken Triple plate a race clutch, it is very drivable on the street.

 

Agree with that. I have one in my car which is severe overkill now that I am not going single

[supradibbs]

Considering the OS Giken Triple plate a race clutch, it is very drivable on the street.

 

Running one on mine and she handle 920 hp no problem and nice clutch to use too