N/A mkiv flywheel fit on a 1JZ

[little num]

Hi folks, im thinking of fitting a 1JZ into my N/A was wondering if the flywheel bolting battern is the same as the 2JZ, also have any1 done or doing the same conversion into a manual N/A.

Any advise or help would be a really big help .

[David Reid]

Yes 1J / 2J is the same

[Swampy442]

Happy days

[ray007]

Hi folks, im thinking of fitting a 1JZ into my N/A was wondering if the flywheel bolting battern is the same as the 2JZ, also have any1 done or doing the same conversion into a manual N/A.

Any advise or help would be a really big help .

 

Swampy's 1jz engine bolted straight on to my w58.

 

good luck with the conversion

[little num]

Quick update, collect the soarer today and got it down my unit, started work on it at about 3pm, took the dash out and heater matrix out so i could get to the ecu and all the plug's hidden behind it.

Within 2 hours id cut out all the unwanted wire's and still got the engine purring like a kitten, all i need to do now is take the engine out and clean it up, ready for installing EEASSYYY.

Before i started stripping the car out, as it still has 6 months mot - tax i decided to give it a good seeing to and to be fair it pulls really well, the car is very heavy and the auto box is slow but impressed so far, its got a second decat and a full stainless exhaust and sounds noisey.

Once i have my boost controller and water injection fitted im hoping to be around 380hp at 1.1 ish.

[Kirk]

Wait is this now a project thread?