Guest donx95 Posted March 25, 2010 Share Posted March 25, 2010 I noticed some time ago that brake caliper rebuilds were being offered for approx. £80 each. I need 1 for my '93 J spec - rear, nearside, single pot. Can anybody let me know who the supplier might be? Don Link to comment Share on other sites More sharing options...
SupraHuman Posted March 25, 2010 Share Posted March 25, 2010 Mr T?? or Whifbitz perhaps. Link to comment Share on other sites More sharing options...
BOB B Posted March 25, 2010 Share Posted March 25, 2010 I think Chris Wilson does them also. Link to comment Share on other sites More sharing options...
Dnk Posted March 26, 2010 Share Posted March 26, 2010 £80 each !! Does that include new seals ? Do them yourself it's not hard to do and a seal kit to do 2 front calipers is under £40 from Toyota. Once they were off the car i did the front and rears in approx a couple of hours, stripped, cleaned and refit all new seals etc ready to go back on the car. That was UK spec too so 12 pistons. Link to comment Share on other sites More sharing options...
Stevo Posted March 26, 2010 Share Posted March 26, 2010 £80 each !! Does that include new seals ? Do them yourself it's not hard to do and a seal kit to do 2 front calipers is under £40 from Toyota. Once they were off the car i did the front and rears in approx a couple of hours, stripped, cleaned and refit all new seals etc ready to go back on the car. That was UK spec too so 12 pistons. Did that include new pistons too? Link to comment Share on other sites More sharing options...
Dnk Posted March 26, 2010 Share Posted March 26, 2010 Did that include new pistons too? Unless the pistons have been subject to dirt and moisture for some time so they've become pitted then you usually dont have to replace the pistons. Out of the 12 pistons on the uk calipers i refurbed they only needed 2 pistons replacing. Think the pistons are around £15 each so you wouldn't just change them unless they were pitted around there outer diameter where they slide through the inner seal. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now