SupraShaun Posted December 8, 2009 Share Posted December 8, 2009 Hi all, im looking to a buy an AFR gauge but am currently torn between two. Whats the better gauge (if any) between the AEM UEGO and the Innovate LC-1? Or does it just come down to personal preference/ looks? Shaun Quote Link to comment Share on other sites More sharing options...
johnny g Posted December 8, 2009 Share Posted December 8, 2009 AEM for me. I got mine off Ryan's recommendation Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted December 8, 2009 Share Posted December 8, 2009 AEM for me. I got mine off Ryan's recommendation Quote Link to comment Share on other sites More sharing options...
Ryan.G Posted December 8, 2009 Share Posted December 8, 2009 Aem Shaun Quote Link to comment Share on other sites More sharing options...
SupraShaun Posted December 8, 2009 Author Share Posted December 8, 2009 Great, thanks for your responses AEM it is then Quote Link to comment Share on other sites More sharing options...
johnny g Posted December 8, 2009 Share Posted December 8, 2009 Decision made in 9 minutes. Top drawer! Quote Link to comment Share on other sites More sharing options...
hodge Posted December 8, 2009 Share Posted December 8, 2009 The aem is a very affordable bit of kit at the min. I got 1 from an eBay shop for 165 quid delivered. Ordered it 1 day and it came the next. Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted December 8, 2009 Share Posted December 8, 2009 Innovate every time, been using the LM-1 for the last six years with no problems, with the datloging it invaluable, its also has a better scale;) Quote Link to comment Share on other sites More sharing options...
dr_jekyll Posted December 8, 2009 Share Posted December 8, 2009 i have the lm-1 , im verry happy with it Quote Link to comment Share on other sites More sharing options...
Ryan.G Posted December 8, 2009 Share Posted December 8, 2009 Innovate every time, been using the LM-1 for the last six years with no problems, with the datloging it invaluable, its also has a better scale;) Have you ever tested it with calibration gas? Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted December 8, 2009 Share Posted December 8, 2009 Have you ever tested it with calibration gas? No other than free air, see no reason to doubt it, but as it uses the same Bosch sensor as the AEM, so it will all be down to the electronics and software, It was tested against a few other widebands by a US magazine and was rated the best of the bunch, also reads richer AFRs than some others. Anyway as said it has been fitted to three different cars that i have tuned over a six year period, with only one replacement sensor, and has worked perfectly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.