Jellybean Posted July 22, 2009 Share Posted July 22, 2009 What LED Flasher relay (replace the one in the drivers footwell) do you use to reduce quick flashing for the indicators Link to comment Share on other sites More sharing options...
R Black Posted July 22, 2009 Share Posted July 22, 2009 Quick flashing usually means a bulbs gone? Link to comment Share on other sites More sharing options...
Jellybean Posted July 22, 2009 Author Share Posted July 22, 2009 Quick flashing usually means a bulbs gone? Not with LEDs as they have a different resistance to the normal Bulbs Link to comment Share on other sites More sharing options...
SteveR Posted July 22, 2009 Share Posted July 22, 2009 Add resistance, job done? Link to comment Share on other sites More sharing options...
Jellybean Posted July 22, 2009 Author Share Posted July 22, 2009 Add resistance, job done? The question was What LED Flasher relay do I use to replace the current one in order to add resistance Link to comment Share on other sites More sharing options...
R Black Posted July 22, 2009 Share Posted July 22, 2009 Not with LEDs as they have a different resistance to the normal Bulbs Sorry thought i was missing something, i will go hide in a corner now. Link to comment Share on other sites More sharing options...
JustGav Posted July 22, 2009 Share Posted July 22, 2009 The question was What LED Flasher relay do I use to replace the current one in order to add resistance Yes, and the more common way of doing it, is to put the correct resistance in-line near the LEDs.... However, using google like such http://www.google.co.uk/search?hl=en&q=led+flasher+relay&btnG=Google+Search&meta=&aq=0s&oq=LED+flash+relay MAY provide you with an answer.... Link to comment Share on other sites More sharing options...
heckler Posted July 22, 2009 Share Posted July 22, 2009 (edited) Yes, and the more common way of doing it, is to put the correct resistance in-line near the LEDs.... Yup.... Edited July 22, 2009 by JustGav (see edit history) Link to comment Share on other sites More sharing options...
SteveR Posted July 22, 2009 Share Posted July 22, 2009 The question was What LED Flasher relay do I use to replace the current one in order to add resistance I understood that, but it sounded an unecessary faff, because... ...the more common way of doing it, is to put the correct resistance in-line near the LEDs.... Yup.... See Link to comment Share on other sites More sharing options...
mike_mcevoy Posted July 22, 2009 Share Posted July 22, 2009 Or you could just get the correct Relay for an LED and not faff around with resisters http://www.autoelectricsupplies.co.uk/product/726 I used one of these when we converted the Rally car to LED's. they're not cheap but there is also no moving parts to go wrong. Link to comment Share on other sites More sharing options...
Jellybean Posted July 22, 2009 Author Share Posted July 22, 2009 As mike pointed out The Relay is a better way of doin it Link to comment Share on other sites More sharing options...
Jellybean Posted July 22, 2009 Author Share Posted July 22, 2009 Yes, and the more common way of doing it, is to put the correct resistance in-line near the LEDs.... However, using google like such http://www.google.co.uk/search?hl=en&q=led+flasher+relay&btnG=Google+Search&meta=&aq=0s&oq=LED+flash+relay MAY provide you with an answer.... Once again the Question is What LED Flasher relay do I use As you can see Gav Google returns many types of relays , so no it doesnt provide me with the answer Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted July 22, 2009 Share Posted July 22, 2009 I'd just get the relay, resistors will do the same job but they are dissipating all that power as heat which means you need big wire wound load resistors(the one's in the alloy case), these are nearly as expensive as the relay. Link to comment Share on other sites More sharing options...
Jellybean Posted July 22, 2009 Author Share Posted July 22, 2009 I'd just get the relay, resistors will do the same job but they are dissipating all that power as heat which means you need big wire wound load resistors(the one's in the alloy case), these are nearly as expensive as the relay. Plus the relay is just plug and play no soldering and messing with wires So does anybody know what one to get? Link to comment Share on other sites More sharing options...
mike_mcevoy Posted July 22, 2009 Share Posted July 22, 2009 as far as I know there is only one type, the relay pin outs are fairly universal but if you take out your current one and see if it has a three or a four pin out ( Forth is for the hazzard flasher) Link to comment Share on other sites More sharing options...
Guest blueangel Posted July 22, 2009 Share Posted July 22, 2009 Its a 3 pin flasher found in the top of the drivers footwell CF13 Gl2 should be the one. Link to comment Share on other sites More sharing options...
Jellybean Posted July 22, 2009 Author Share Posted July 22, 2009 as far as I know there is only one type, the relay pin outs are fairly universal but if you take out your current one and see if it has a three or a four pin out ( Forth is for the hazzard flasher) This might do if the car is a 3 pin configuration http://cgi.ebay.com.sg/3-Pin-Electronic-Flasher-Relay-Unit-For-LED-Indicators_W0QQitemZ110412070518QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item19b5127e76&_trksid=p4634.c0.m14&_trkparms=%7C293%3A1%7C294%3A30 Link to comment Share on other sites More sharing options...
Jellybean Posted July 22, 2009 Author Share Posted July 22, 2009 Its a 3 pin flasher found in the top of the drivers footwell CF13 Gl2 should be the one. Hi Ric is the CF13 Gl2 the Relay I should buy or replace? Link to comment Share on other sites More sharing options...
Guest blueangel Posted July 22, 2009 Share Posted July 22, 2009 is the code on the one you want to buy fella Link to comment Share on other sites More sharing options...
Jellybean Posted July 22, 2009 Author Share Posted July 22, 2009 Another Stupid question, when I have the hazards on they work at normal expected rate of blinking, with this LED relay installed will they now be very slow when the hazards are on? And you just need one Relay? Link to comment Share on other sites More sharing options...
Guest blueangel Posted July 22, 2009 Share Posted July 22, 2009 just one relay needed fella the hazards will still be ok as they work on a diff circuit Link to comment Share on other sites More sharing options...
Jellybean Posted July 22, 2009 Author Share Posted July 22, 2009 just one relay needed fella the hazards will still be ok as they work on a diff circuit on Ebay all the 3 pin relays have code CF13 JL02 Link to comment Share on other sites More sharing options...
Guest blueangel Posted July 22, 2009 Share Posted July 22, 2009 1 min http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=380097824332&Category=14763&_trkparms=algo%3DLVI%26its%3DI%26otn%3D1 Link to comment Share on other sites More sharing options...
Jellybean Posted July 22, 2009 Author Share Posted July 22, 2009 this is the closest on ebay Link to comment Share on other sites More sharing options...
Jellybean Posted July 22, 2009 Author Share Posted July 22, 2009 1 min http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=380097824332&Category=14763&_trkparms=algo%3DLVI%26its%3DI%26otn%3D1 sorry missed the link, thanks Ric Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now