Terminator Posted July 4, 2009 Share Posted July 4, 2009 All the following are surplus to requirements. Mikalor stainless clamps: Some stilling original packages, most unused some just opened to test fit. 7 X 47mm to 51mm £1.70 each (2 sold) 7 X 79mm to 85mm £2.70 each 2 X 85mm to 91mm £2.80 each Mikalor clamps + PP All clamps now sold Stock BOV ( from my car) £11 posted SOLD pending payment HKS SSQV flange for hose fitting( allows bov to be mounted when every you want at the end of a hose. NO welding required. New Never used, hard to find these now. £16 posted New. Black reinforced silicone hose connector 102mm 4" ID 70mm 4 ply 3 cord plys. £6.50 posted SOLD Pics to follow Link to comment Share on other sites More sharing options...
Terminator Posted July 5, 2009 Author Share Posted July 5, 2009 Stock Bov _ working HKS SSQV flange, aluminium hose fitting type not weld on. HKS SSQV flange, aluminium hose fitting type not weld on. Mikalor stainless steel clamps Link to comment Share on other sites More sharing options...
Terminator Posted July 5, 2009 Author Share Posted July 5, 2009 New. Black reinforced silicone hose connector 102mm 4" ID 70mm 4 ply 3 cord plys. £6.50 posted SOLD Link to comment Share on other sites More sharing options...
Pixelfill Posted July 5, 2009 Share Posted July 5, 2009 you wouldn't happen to know what size clamps are needed for the top Rad hose would you Phil? if you have the right size can I take 2 please Mike Link to comment Share on other sites More sharing options...
Terminator Posted July 5, 2009 Author Share Posted July 5, 2009 Mike I have a hard pipe for my top rad hose. Just tried one of the Mikalor 47mm - 51mm clamps and it is tight fit with about 1/4 inch of closure left, on the top of the silicone hose over the hard pipe, so I'd say they fit. I have an Ali rad so not sure about that end of the coupling. If they are no good I'll cover your postage to send them back to me. If that sounds OK, drop me a PM and can take it from there. Link to comment Share on other sites More sharing options...
scotty supra Posted July 7, 2009 Share Posted July 7, 2009 Ill have the stock bov mate. Dont suppose you have the hoses for it? Link to comment Share on other sites More sharing options...
michel lane Posted July 7, 2009 Share Posted July 7, 2009 ill take all the mikalors please and the 4 inch silicon hose connector. pm me your details and full amount please. michel Link to comment Share on other sites More sharing options...
Terminator Posted September 8, 2009 Author Share Posted September 8, 2009 Found another unused black silicone 4" conector, this one is 5 cord ply so a little more robust than the other one previouslt sold. £7.50 posted. Link to comment Share on other sites More sharing options...
Marc Posted September 8, 2009 Share Posted September 8, 2009 i'll have the ssqv flange please, can you send me your full details please? Link to comment Share on other sites More sharing options...
Terminator Posted October 3, 2009 Author Share Posted October 3, 2009 Black 4" silicone 5 ply (very tough) connector still available. Could take to Pod on 4 October. £7.00@ Pod, £7.50 posted. Link to comment Share on other sites More sharing options...
Recommended Posts