GoliathJay Posted February 24, 2009 Share Posted February 24, 2009 Not sure what the part number or name is for this, but the inserts in the front bumper pictured below. Anyone know supplier/cost/name, & how do you install them? Link to comment Share on other sites More sharing options...
jevansio Posted February 24, 2009 Share Posted February 24, 2009 FWIW I prefer them without, I removed mine, makes the front end more aggressive Have you tried Toyota? Or Nic? Link to comment Share on other sites More sharing options...
GoliathJay Posted February 24, 2009 Author Share Posted February 24, 2009 I don't really know what they are called or the part number, so was hoping someone might beable to help with my ignorance. I heard they were £35? That seems too cheap though. Looking to sell yours? Link to comment Share on other sites More sharing options...
Lukeyboy2k Posted February 24, 2009 Share Posted February 24, 2009 I got mine from Steve @ Toyota Oxford last year. I think it was about £23. They come pre-sprayed in stock colours. Link to comment Share on other sites More sharing options...
Guigsy Posted February 24, 2009 Share Posted February 24, 2009 I got mine from Steve @ Toyota Oxford last year. I think it was about £23. They come pre-sprayed in stock colours. yeah that. just pop down toyota. I just went in and said what i wanted and they found it for me. didnt need a part number Link to comment Share on other sites More sharing options...
GoliathJay Posted February 24, 2009 Author Share Posted February 24, 2009 Great! Thanks a lot guys. Do they take a lot of fitting? Link to comment Share on other sites More sharing options...
Dave17 Posted February 24, 2009 Share Posted February 24, 2009 Not too keen on the bumper bars to be honest, perhaps some nice mesh on the front. The stuff that there was the group buy on "recently" looked good but was just too expensive for what it is. Link to comment Share on other sites More sharing options...
Guigsy Posted February 24, 2009 Share Posted February 24, 2009 nope. not realy. they just sit in the fixings that are already there if i remember correctly. I zip tied them in aswell tho because im lazy Only have an issue with the ends where there are no fixings but there are 2 prongs, one on each end. I cut them off and just put a little bit of that tape stuff that you stick spats on with on there as i didnt want to drill the bumper. But tbh that wouldnt have been a big job I love the bumper bar, meshed ones just look too bling Link to comment Share on other sites More sharing options...
jevansio Posted February 24, 2009 Share Posted February 24, 2009 I sold mine a while back otherwise you could have had it bud Link to comment Share on other sites More sharing options...
Nic Posted February 24, 2009 Share Posted February 24, 2009 Anyone know supplier/cost/name, & how do you install them? The Toyota EPC name for the part is 'GRILLE, RADIATOR, LOWER', they come colour coded, if your Supra is white (040) the part number is 53112-14070-A0. If you need source for one just let me know. Link to comment Share on other sites More sharing options...
themodifiedkid Posted February 24, 2009 Share Posted February 24, 2009 Not sure what the part number or name is for this, but the inserts in the front bumper pictured below. Anyone know supplier/cost/name, & how do you install them? http://img.photobucket.com/albums/v613/dmargrave/supra-oct-1.jpg I have a set from my white (040) facelift supra, ill sell them for £15 posted if ur interested. Just send me a pm mate Link to comment Share on other sites More sharing options...
Supradan Posted February 24, 2009 Share Posted February 24, 2009 If he isnt i am:) Link to comment Share on other sites More sharing options...
Sandy-m2 Posted February 24, 2009 Share Posted February 24, 2009 Just on a different topic...what offsets are those wheels? Link to comment Share on other sites More sharing options...
GoliathJay Posted February 24, 2009 Author Share Posted February 24, 2009 (edited) Just on a different topic...what offsets are those wheels? Not sure if this helps but... 18x10F & 17x11.5R CCW Classic Wheels http://www.accelcreative.com/acceljunky/images/htsup3-big.jpg Edited February 24, 2009 by GoliathJay (see edit history) Link to comment Share on other sites More sharing options...
marc_p Posted February 25, 2009 Share Posted February 25, 2009 It's pictures like this that make me want to put the standard front back on mine. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now