Tricky-Ricky Posted August 14, 2008 Share Posted August 14, 2008 Other than a makers name, is there any way to tell an HKS 50mm from an XS 50mm WG? Also if it has a 0.5 bar spring, would it be asking too much to get it to more than 1.0 bar with boost controller, or will i need to fir say a 0.8 bar spring? Quote Link to comment Share on other sites More sharing options...
JamieP Posted August 14, 2008 Share Posted August 14, 2008 (edited) The hks has a square 4 bolt flange and the xs power has a rectangle 4 bolt flange. Edited August 14, 2008 by JamieP (see edit history) Quote Link to comment Share on other sites More sharing options...
bolarbag Posted August 14, 2008 Share Posted August 14, 2008 Your 0.5Bar spring should hold to 1.0Bar using a boost controller or jsut a solenoid driven off the ecu, if you want to run say 1.4-1.6bar, then its probably best to install a 1.0bar spring - if there is such an option for your WG, Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted August 14, 2008 Author Share Posted August 14, 2008 OK thanks guys, so as i have an XS manifold i must have XS WG, anyone know if they have a top spring plate, can't remember when i took mine apart, the i could make it adjustable;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.