hodge Posted April 18, 2008 Share Posted April 18, 2008 As some of you may know im a bit partial to shiney bits in my engine bay. Now Colin (Colsoop) has decided to call it a day, what am I going to do. Not only was Colins work floorless but the turnaround was really quick, most of the time I received my parts back in a week. Any recomendstions or anyone on here can help me with this. Link to comment Share on other sites More sharing options...
miko_supra Posted April 18, 2008 Share Posted April 18, 2008 build your own chroming bath? Link to comment Share on other sites More sharing options...
SupraShaun Posted April 18, 2008 Share Posted April 18, 2008 As some of you may know im a bit partial to shiney bits in my engine bay. Now Colin (Colsoop) has decided to call it a day, what am I going to do. Not only was Colins work floorless but the turnaround was really quick, most of the time I received my parts back in a week. Any recomendstions or anyone on here can help me with this. Id like to now the answer to this too Link to comment Share on other sites More sharing options...
jamesmark Posted April 18, 2008 Share Posted April 18, 2008 build your own chroming bath? I have seen first hand work done by Col and other traders on here and Cols workmanship has always been in a different league. Link to comment Share on other sites More sharing options...
Mike M Posted April 18, 2008 Share Posted April 18, 2008 Let me draw your attention to this:- http://www.frost.co.uk/productList.asp?catID=26&frostCat=Electroplating They do anodising kits too in quite a few colours. Link to comment Share on other sites More sharing options...
captainchaos Posted April 18, 2008 Share Posted April 18, 2008 I know a fella up our way for chroming and as i said i may let you use our machines if your nice Link to comment Share on other sites More sharing options...
hodge Posted April 18, 2008 Author Share Posted April 18, 2008 Thought you didnt have a chroming tank. Link to comment Share on other sites More sharing options...
Gaz Walker Posted April 18, 2008 Share Posted April 18, 2008 We used to do it before Col decided to do it but had it outsourced, were are now thinking of bringing it in house. Going to take us a while to get the kit and get set up though, depends how long you can wait! Gaz. Link to comment Share on other sites More sharing options...
captainchaos Posted April 18, 2008 Share Posted April 18, 2008 no for polishing man, but i know a company pretty close to us for chroming intead of getting eyes ripped out. Link to comment Share on other sites More sharing options...
hodge Posted April 18, 2008 Author Share Posted April 18, 2008 I'll bring my whole engine down tonight mate. Link to comment Share on other sites More sharing options...
captainchaos Posted April 18, 2008 Share Posted April 18, 2008 lol nee bother Link to comment Share on other sites More sharing options...
captainchaos Posted April 18, 2008 Share Posted April 18, 2008 just been called in this morning to see your slam panel, bloody nightmare getting them cut but they have them programmed up ready to go. Link to comment Share on other sites More sharing options...
hodge Posted April 18, 2008 Author Share Posted April 18, 2008 have you left the holes for the bonnet ctches out I mentioned as ive taken the bonnet catches off. Link to comment Share on other sites More sharing options...
captainchaos Posted April 18, 2008 Share Posted April 18, 2008 Only holes it has is the bolt holes and the little notches on the back end Link to comment Share on other sites More sharing options...
hodge Posted April 18, 2008 Author Share Posted April 18, 2008 Top bloke. any idea when it will be done. (and dont just say soon). Link to comment Share on other sites More sharing options...
captainchaos Posted April 18, 2008 Share Posted April 18, 2008 was supposed to me done today but my bro has put work on before them. So been told no later than monday and ill drop it off monday night, when im up lynz's. Gonna leave the protective coating on so you may need to clean the edges of the plate where the laser has melted the plastic film. Link to comment Share on other sites More sharing options...
captainchaos Posted April 18, 2008 Share Posted April 18, 2008 just got my little switch plate back to see what the laser etching is like and you know what you give some one a simple drawing and you get something silly back lol. Anyone ever heard of a PIFF pump? yes and the rad and oil one was supposed to be fan not pump too. Cleaned the fuel pump when material is laser etched you sometimes get a small build up. Link to comment Share on other sites More sharing options...
colsoop Posted April 18, 2008 Share Posted April 18, 2008 I did look in to bringing the chroming in house a year or so back. The health and safety regulatiuons are crippling though so left it to a 3rd party to do. If you are patient and prepared to accept some failure based costs to begin with you can get some good results from a kit. Just be aware of storing and disposing of the nasty chemicals used also the right protective gear for the job ! Link to comment Share on other sites More sharing options...
Firestorm Posted April 18, 2008 Share Posted April 18, 2008 i think we need to start a threat/petition to get colin (colsoop) back to chroming! LOL im sure he wouldnt but we could try Link to comment Share on other sites More sharing options...
razza Posted April 18, 2008 Share Posted April 18, 2008 i think we need to start a threat/petition to get colin (colsoop) back to chroming! LOL im sure he wouldnt but we could try let's get pressurising him:eyebrows: Link to comment Share on other sites More sharing options...
supradibbs Posted April 18, 2008 Share Posted April 18, 2008 I can still have polishing done what are you after http://www.mkivsupra.net/vbb/showthread.php?t=145369 Link to comment Share on other sites More sharing options...
bmx1lew Posted April 18, 2008 Share Posted April 18, 2008 I can still have polishing done what are you after http://www.mkivsupra.net/vbb/showthread.php?t=145369 how much would cost to have the most of the visual parts done Intake, cams turbo pipes, them little pipes that run over the top of the turbo pipes (near where you fit your hks ssq) and the rad pipe and any thing else that is easy to see, Im not to bothered about having every thing done i just want my bay to look clean Link to comment Share on other sites More sharing options...
hodge Posted April 18, 2008 Author Share Posted April 18, 2008 you'll be tlking a few hundred quid to get all that lot chromed Lewis. I must have spent a grand almost on polishing and chroming. Link to comment Share on other sites More sharing options...
Pete Posted April 19, 2008 Share Posted April 19, 2008 I can still have polishing done what are you after http://www.mkivsupra.net/vbb/showthread.php?t=145369 Cool an alternative to the now retired Colin. Where's that from Wayne? (I assume you won't mind saying now you're not a club trader anymore?) Link to comment Share on other sites More sharing options...
Daston Posted April 19, 2008 Share Posted April 19, 2008 We used to do it before Col decided to do it but had it outsourced, were are now thinking of bringing it in house. Going to take us a while to get the kit and get set up though, depends how long you can wait! Gaz. Will you be able to do non supra/jap stuff? Was thinking of giving the Tuscan engine bay a bit of colour and shine when I get one... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now