Sharpie Posted April 1, 2008 Share Posted April 1, 2008 While having an MOT yesterday, the MOT guy found a VERY loose nut. Looking at the repair manual's, I found it was the Lower Suspension Arm Bracket Stay NUT that was loose on the drivers side. Would I be correct in saying that my geometry will be out now ? A few pic's (under car shot from 2002) Link to comment Share on other sites More sharing options...
Burna Posted April 1, 2008 Share Posted April 1, 2008 I'm pretty sure that location is a cam for adjustment, I'd get it checked for peace of mind. To have it checked to see if it's within stock or your own settings is free where I go. Link to comment Share on other sites More sharing options...
Sharpie Posted April 1, 2008 Author Share Posted April 1, 2008 I'll have to see when CW is free. Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 1, 2008 Share Posted April 1, 2008 It won't affect the geo at all. It purely locates the stay, and shouldn't be an MOT fail either. I have come across a few that have been loose for no apparent reason, too. Found one to be the source of a very annoying vibration at certain RPM's that I felt sure was an engine mounting. Link to comment Share on other sites More sharing options...
Sharpie Posted April 1, 2008 Author Share Posted April 1, 2008 Cheers Chris. It passed no problem and he got his tools out to fix it there and then, nice chap that he is. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now