Wez Posted May 13, 2008 Author Share Posted May 13, 2008 Bump Link to comment Share on other sites More sharing options...
Wez Posted June 15, 2008 Author Share Posted June 15, 2008 Bump, accepted offers now Link to comment Share on other sites More sharing options...
supradriver Posted July 9, 2008 Share Posted July 9, 2008 will it fit in a N/A casing as i have a LSD but it on its way out? Link to comment Share on other sites More sharing options...
madwoody1 Posted December 11, 2008 Share Posted December 11, 2008 Does anyone know how these diffs differ from a standard open diff am i right in saying that a open diff will spin the easiest wheel to turn and this one your selling will spin the easiest wheel for a short time then lock the diff and spin both wheels? Link to comment Share on other sites More sharing options...
Wez Posted January 15, 2009 Author Share Posted January 15, 2009 Bump. Link to comment Share on other sites More sharing options...
adi2009 Posted January 16, 2009 Share Posted January 16, 2009 If anyone has any doubts which CWP and casing and bearings / seals this centre section needs I can advise.... Chris, I ve got a spare diff which is broken. torsen is broken and ring and pinion are damaged also. Other than this (the torsen that Wez is selling) I would need a new set of ring and pinion right??? Is it an easy job to refurbish??? Cheers adi Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 16, 2009 Share Posted January 16, 2009 Unless you have done a few diffs before and have the correct measuring tools I wouldn't even think about doing one, on a scale of ten, the expertise needed to do this correctly is about eight. Link to comment Share on other sites More sharing options...
Recommended Posts