QSC Posted February 22, 2008 Share Posted February 22, 2008 Does anyone know if the rear and front washers operate from the same motor ? Fronts not working, just blew out the jets with compressed air, but still nothing, while the rear works fine Link to comment Share on other sites More sharing options...
Ian C Posted February 22, 2008 Share Posted February 22, 2008 1) yes 2) press the button on the end, don't pull the stalk towards you. Link to comment Share on other sites More sharing options...
QSC Posted February 22, 2008 Author Share Posted February 22, 2008 1) yes 2) press the button on the end, don't pull the stalk towards you. No offense intended, but I am pressing the button on the end - if I wasn't, surely the rear washer wouldn't be working ? Does anyone know exactly where the motor is situated, and do you need to remove the inner wing liner to get to it ? Link to comment Share on other sites More sharing options...
QSC Posted February 22, 2008 Author Share Posted February 22, 2008 Found out what it was - someones wired them up the wrong way - press the button on the end & the rear one works - twist the stalk clockwise & the front ones work - must be wired wrong at the motor end I guess Link to comment Share on other sites More sharing options...
Ian C Posted February 22, 2008 Share Posted February 22, 2008 Goddamn it the one time I pile in with the "usual" solution, that's not the problem I give up answering questions on the windscreen washers. Link to comment Share on other sites More sharing options...
dwayne Posted February 22, 2008 Share Posted February 22, 2008 edited due to talking rubbish (not reading the post properly;) ) Link to comment Share on other sites More sharing options...
QSC Posted February 23, 2008 Author Share Posted February 23, 2008 Goddamn it the one time I pile in with the "usual" solution, that's not the problem I give up answering questions on the windscreen washers. I read your previous answer before I posted actually - though you did help - I was thinking both washers worked off the same button. Link to comment Share on other sites More sharing options...
Ric Posted February 23, 2008 Share Posted February 23, 2008 Found out what it was - someones wired them up the wrong way - press the button on the end & the rear one works - twist the stalk clockwise & the front ones work - must be wired wrong at the motor end I guess gonna say, the rear one doesent work on the button, only the fronts Link to comment Share on other sites More sharing options...
AndyRick1 Posted February 23, 2008 Share Posted February 23, 2008 Found out what it was - someones wired them up the wrong way - press the button on the end & the rear one works - twist the stalk clockwise & the front ones work - must be wired wrong at the motor end I guess They are not wired wrong its that the tubes are connected wrong at the pump.you have to undo the plastic on the inner wing (nearside) and then you can just swap them around Link to comment Share on other sites More sharing options...
QSC Posted February 23, 2008 Author Share Posted February 23, 2008 They are not wired wrong its that the tubes are connected wrong at the pump.you have to undo the plastic on the inner wing (nearside) and then you can just swap them around Yep, that's what I think is the likely cause, must have happened while the car was in the bodyshop... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now